[net-next v4 4/4] net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs

From
Jacky Chou <jacky_chou@aspeedtech.com>
Date
2025-07-09 07:08:28
Also in
linux-arm-kernel, linux-aspeed, linux-clk, linux-devicetree, lkml
Reply to
Jacky Chou, 2025-07-09
On Aspeed SoCs, the internal MAC reset is insufficient to fully reset the
RMII interface; only the SoC-level reset line can properly reset the RMII
logic. This patch adds support for an optional "resets" property in the
device tree, allowing the driver to assert and deassert the SoC reset line
when operating in RMII mode. This ensures the MAC and RMII interface are
correctly reset and initialized.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index a98d5af3f9e3..05b8e3743a79 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -9,6 +9,7 @@
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
@@ -101,6 +102,8 @@ struct ftgmac100 {
 
 	/* AST2500/AST2600 RMII ref clock gate */
 	struct clk *rclk;
+	/* Aspeed reset control */
+	struct reset_control *rst;
 
 	/* Link management */
 	int cur_speed;
@@ -148,6 +151,23 @@ static int ftgmac100_reset_and_config_mac(struct ftgmac100 *priv)
 {
 	u32 maccr = 0;
 
+	/* Aspeed RMII needs SCU reset to clear status */
+	if (priv->is_aspeed && priv->netdev->phydev->interface == PHY_INTERFACE_MODE_RMII) {
+		int err;
+
+		err = reset_control_assert(priv->rst);
+		if (err) {
+			dev_err(priv->dev, "Failed to reset mac (%d)\n", err);
+			return err;
+		}
+		usleep_range(10000, 20000);
+		err = reset_control_deassert(priv->rst);
+		if (err) {
+			dev_err(priv->dev, "Failed to deassert mac reset (%d)\n", err);
+			return err;
+		}
+	}
+
 	switch (priv->cur_speed) {
 	case SPEED_10:
 	case 0: /* no link */
@@ -1968,6 +1988,12 @@ static int ftgmac100_probe(struct platform_device *pdev)
 
 	}
 
+	priv->rst = devm_reset_control_get_optional_exclusive(priv->dev, NULL);
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		goto err_phy_connect;
+	}
+
 	if (priv->is_aspeed) {
 		err = ftgmac100_setup_clk(priv);
 		if (err)
-- 
2.34.1
Thread (8 messages) 8 messages, 4 authors, last reply 2025-07-11
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help