[PATCH 01/15] net: rnpgbe: Add build support for rnpgbe

@@ -59,6 +59,7 @@ Contents:
    ti/icssg_prueth
    wangxun/txgbe
    wangxun/ngbe
+   mucse/rnpgbe
 
 .. only::  subproject and html
 

@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Linux Base Driver for MUCSE(R) Gigabit PCI Express Adapters
+===========================================================
+
+MUCSE Gigabit Linux driver.
+Copyright (c) 2020 - 2025 MUCSE Co.,Ltd.
+
+Identifying Your Adapter
+========================
+The driver is compatible with devices based on the following:
+
+ * MUCSE(R) Ethernet Controller N500 series
+ * MUCSE(R) Ethernet Controller N210 series
+
+Support
+=======
+ If you have problems with the software or hardware, please contact our
+ customer support team via email at marketing@mucse.com or check our website
+ at https://www.mucse.com/en/

@@ -16001,11 +16001,7 @@ F:	tools/testing/vma/
 
 MEMORY MAPPING - LOCKING
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Suren Baghdasaryan <surenb@google.com>
-M:	Liam R. Howlett <Liam.Howlett@oracle.com>
-M:	Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
-R:	Vlastimil Babka <vbabka@suse.cz>
-R:	Shakeel Butt <shakeel.butt@linux.dev>
+M:	Suren Baghdasaryan <surenb@google.com> M:	Liam R. Howlett <Liam.Howlett@oracle.com> M:	Lorenzo Stoakes <lorenzo.stoakes@oracle.com> R:	Vlastimil Babka <vbabka@suse.cz> R:	Shakeel Butt <shakeel.butt@linux.dev>
 L:	linux-mm@kvack.org
 S:	Maintained
 W:	http://www.linux-mm.org

@@ -16986,6 +16982,14 @@ T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
 F:	drivers/media/i2c/mt9v111.c
 
+MUCSE ETHERNET DRIVER
+M:	Yibo Dong <dong100@mucse.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://www.mucse.com/en/
+F:	Documentation/networking/device_drivers/ethernet/mucse/*
+F:	drivers/net/ethernet/mucse/*
+
 MULTIFUNCTION DEVICES (MFD)
 M:	Lee Jones <lee@kernel.org>
 S:	Maintained

@@ -202,5 +202,6 @@ source "drivers/net/ethernet/wangxun/Kconfig"
 source "drivers/net/ethernet/wiznet/Kconfig"
 source "drivers/net/ethernet/xilinx/Kconfig"
 source "drivers/net/ethernet/xircom/Kconfig"
+source "drivers/net/ethernet/mucse/Kconfig"
 
 endif # ETHERNET

@@ -107,3 +107,4 @@ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
 obj-$(CONFIG_NET_VENDOR_SYNOPSYS) += synopsys/
 obj-$(CONFIG_NET_VENDOR_PENSANDO) += pensando/
 obj-$(CONFIG_OA_TC6) += oa_tc6.o
+obj-$(CONFIG_NET_VENDOR_MUCSE) += mucse/

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Mucse network device configuration
+#
+
+config NET_VENDOR_MUCSE
+        bool "Mucse devices"
+        default y
+        help
+          If you have a network (Ethernet) card belonging to this class, say Y.
+
+          Note that the answer to this question doesn't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about Mucse cards. If you say Y, you will be asked for
+          your specific card in the following questions.
+
+
+if NET_VENDOR_MUCSE
+
+config MGBE
+	tristate "Mucse(R) 1GbE PCI Express adapters support"
+        depends on PCI
+	select PAGE_POOL
+        help
+          This driver supports Mucse(R) 1GbE PCI Express family of
+          adapters.
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst>.
+
+          To compile this driver as a module, choose M here. The module
+          will be called rnpgbe.
+
+endif # NET_VENDOR_MUCSE
+

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Mucse(R) network device drivers.
+#
+
+obj-$(CONFIG_MGBE) += rnpgbe/
+

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 - 2025 MUCSE Corporation.
+#
+# Makefile for the MUCSE(R) 1GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_MGBE) += rnpgbe.o
+
+rnpgbe-objs := rnpgbe_main.o

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+
+#ifndef _RNPGBE_H
+#define _RNPGBE_H
+
+#define RNPGBE_MAX_QUEUES (8)
+
+enum rnpgbe_boards {
+	board_n500,
+	board_n210,
+	board_n210L,
+};
+
+struct mucse {
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	/* board number */
+	u16 bd_number;
+
+	char name[60];
+};
+
+/* Device IDs */
+#ifndef PCI_VENDOR_ID_MUCSE
+#define PCI_VENDOR_ID_MUCSE 0x8848
+#endif /* PCI_VENDOR_ID_MUCSE */
+
+#define PCI_DEVICE_ID_N500_QUAD_PORT 0x8308
+#define PCI_DEVICE_ID_N500_DUAL_PORT 0x8318
+#define PCI_DEVICE_ID_N500_VF 0x8309
+#define PCI_DEVICE_ID_N210 0x8208
+#define PCI_DEVICE_ID_N210L 0x820a
+
+#endif /* _RNPGBE_H */

@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include "rnpgbe.h"
+
+char rnpgbe_driver_name[] = "rnpgbe";
+static const char rnpgbe_driver_string[] =
+	"mucse 1 Gigabit PCI Express Network Driver";
+#define DRV_VERSION "1.0.0"
+const char rnpgbe_driver_version[] = DRV_VERSION;
+static const char rnpgbe_copyright[] =
+	"Copyright (c) 2020-2025 mucse Corporation.";
+
+/* rnpgbe_pci_tbl - PCI Device ID Table
+ *
+ * { PCI_DEVICE(Vendor ID, Device ID),
+ *   driver_data (used for different hw chip) }
+ */
+static struct pci_device_id rnpgbe_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_QUAD_PORT),
+	  .driver_data = board_n500},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_DUAL_PORT),
+	  .driver_data = board_n500},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210),
+	  .driver_data = board_n210},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210L),
+	  .driver_data = board_n210L},
+	/* required last entry */
+	{0, },
+};
+
+/**
+ * rnpgbe_add_adpater - add netdev for this pci_dev
+ * @pdev: PCI device information structure
+ *
+ * rnpgbe_add_adpater initializes a netdev for this pci_dev
+ * structure. Initializes Bar map, private structure, and a
+ * hardware reset occur.
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int rnpgbe_add_adpater(struct pci_dev *pdev)
+{
+	struct mucse *mucse = NULL;
+	struct net_device *netdev;
+	static int bd_number;
+
+	pr_info("====  add rnpgbe queues:%d ====", RNPGBE_MAX_QUEUES);
+	netdev = alloc_etherdev_mq(sizeof(struct mucse), RNPGBE_MAX_QUEUES);
+	if (!netdev)
+		return -ENOMEM;
+
+	mucse = netdev_priv(netdev);
+	memset((char *)mucse, 0x00, sizeof(struct mucse));
+	mucse->netdev = netdev;
+	mucse->pdev = pdev;
+	mucse->bd_number = bd_number++;
+	snprintf(mucse->name, sizeof(netdev->name), "%s%d",
+		 rnpgbe_driver_name, mucse->bd_number);
+	pci_set_drvdata(pdev, mucse);
+
+	return 0;
+}
+
+/**
+ * rnpgbe_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @id: entry in rnpgbe_pci_tbl
+ *
+ * rnpgbe_probe initializes a PF adapter identified by a pci_dev
+ * structure. The OS initialization, then call rnpgbe_add_adpater
+ * to initializes netdev.
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int rnpgbe_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int err;
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	/* hw only support 56-bits dma mask */
+	err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(56));
+	if (err) {
+		dev_err(&pdev->dev,
+			"No usable DMA configuration, aborting\n");
+		goto err_dma;
+	}
+
+	err = pci_request_mem_regions(pdev, rnpgbe_driver_name);
+	if (err) {
+		dev_err(&pdev->dev,
+			"pci_request_selected_regions failed 0x%x\n", err);
+		goto err_pci_req;
+	}
+
+	pci_set_master(pdev);
+	pci_save_state(pdev);
+	err = rnpgbe_add_adpater(pdev);
+	if (err)
+		goto err_regions;
+
+	return 0;
+err_regions:
+	pci_release_mem_regions(pdev);
+err_dma:
+err_pci_req:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * rnpgbe_rm_adpater - remove netdev for this mucse structure
+ * @mucse: pointer to private structure
+ *
+ * rnpgbe_rm_adpater remove a netdev for this mucse structure
+ **/
+static void rnpgbe_rm_adpater(struct mucse *mucse)
+{
+	struct net_device *netdev;
+
+	netdev = mucse->netdev;
+	pr_info("= remove rnpgbe:%s =\n", netdev->name);
+	free_netdev(netdev);
+	pr_info("remove complete\n");
+}
+
+/**
+ * rnpgbe_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  This could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void rnpgbe_remove(struct pci_dev *pdev)
+{
+	struct mucse *mucse = pci_get_drvdata(pdev);
+
+	if (!mucse)
+		return;
+
+	rnpgbe_rm_adpater(mucse);
+	pci_release_mem_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static void __rnpgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+	struct mucse *mucse = pci_get_drvdata(pdev);
+	struct net_device *netdev = mucse->netdev;
+
+	*enable_wake = false;
+	netif_device_detach(netdev);
+	pci_disable_device(pdev);
+}
+
+/**
+ * rnpgbe_shutdown - Device Shutdown Routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_shutdown is called by the PCI subsystem to alert the driver
+ * that os shutdown. Device should setup wakeup state here.
+ **/
+static void rnpgbe_shutdown(struct pci_dev *pdev)
+{
+	bool wake = false;
+
+	__rnpgbe_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
+
+static struct pci_driver rnpgbe_driver = {
+	.name = rnpgbe_driver_name,
+	.id_table = rnpgbe_pci_tbl,
+	.probe = rnpgbe_probe,
+	.remove = rnpgbe_remove,
+	.shutdown = rnpgbe_shutdown,
+};
+
+static int __init rnpgbe_init_module(void)
+{
+	int ret;
+
+	pr_info("%s - version %s\n", rnpgbe_driver_string,
+		rnpgbe_driver_version);
+	pr_info("%s\n", rnpgbe_copyright);
+	ret = pci_register_driver(&rnpgbe_driver);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+module_init(rnpgbe_init_module);
+
+static void __exit rnpgbe_exit_module(void)
+{
+	pci_unregister_driver(&rnpgbe_driver);
+}
+
+module_exit(rnpgbe_exit_module);
+
+MODULE_DEVICE_TABLE(pci, rnpgbe_pci_tbl);
+MODULE_AUTHOR("Mucse Corporation, <mucse@mucse.com>");
+MODULE_DESCRIPTION("Mucse(R) 1 Gigabit PCI Express Network Driver");
+MODULE_LICENSE("GPL");