Thread (11 messages) 11 messages, 4 authors, 2025-06-11
STALE402d

[PATCH net-next 5/7] documentation: networking: can: Document alloc_candev_mqs()

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2025-06-10 09:49:40
Also in: linux-can
Subsystem: can network layer, documentation, networking [general], the rest · Maintainers: Oliver Hartkopp, Marc Kleine-Budde, Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since the introduction of alloc_candev_mqs() and friends, there is no
longer a need to allocate a generic network device and perform explicit
CAN-specific setup.  Remove the code showing this setup, and document
alloc_candev_mqs() instead.

Fixes: 39549eef3587f1c1 ("can: CAN Network device driver and Netlink interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/c0f9a706ba31f1a49eb72e58526cd294d97a1ce9.1748865431.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 Documentation/networking/can.rst | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst
index b018ce346392..bc1b585355f7 100644
--- a/Documentation/networking/can.rst
+++ b/Documentation/networking/can.rst
@@ -1104,15 +1104,12 @@ for writing CAN network device driver are described below:
 General Settings
 ----------------
 
+CAN network device drivers can use alloc_candev_mqs() and friends instead of
+alloc_netdev_mqs(), to automatically take care of CAN-specific setup:
+
 .. code-block:: C
 
-    dev->type  = ARPHRD_CAN; /* the netdevice hardware type */
-    dev->flags = IFF_NOARP;  /* CAN has no arp */
-
-    dev->mtu = CAN_MTU; /* sizeof(struct can_frame) -> Classical CAN interface */
-
-    or alternative, when the controller supports CAN with flexible data rate:
-    dev->mtu = CANFD_MTU; /* sizeof(struct canfd_frame) -> CAN FD interface */
+    dev = alloc_candev_mqs(...);
 
 The struct can_frame or struct canfd_frame is the payload of each socket
 buffer (skbuff) in the protocol family PF_CAN.
-- 
2.47.2

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help