[PATCH v1 net-next PATCH 1/1] net: phy: air_en8811h: Introduce resume/suspend and clk_restore_context to ensure correct CKO settings after network interface reinitialization.
From: Lucien.Jheng <hidden>
Date: 2025-06-29 12:01:06
Also in:
linux-clk, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
If the user reinitializes the network interface, the PHY will reinitialize, and the CKO settings will revert to their initial configuration(be enabled). To prevent CKO from being re-enabled, en8811h_clk_restore_context and en8811h_resume were added to ensure the CKO settings remain correct. Signed-off-by: Lucien.Jheng <redacted> --- drivers/net/phy/air_en8811h.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c
index 57fbd8df9438..94cafda1f535 100644
--- a/drivers/net/phy/air_en8811h.c
+++ b/drivers/net/phy/air_en8811h.c@@ -11,6 +11,7 @@ * Copyright (C) 2023 Airoha Technology Corp. */ +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/phy.h> #include <linux/firmware.h>
@@ -865,11 +866,20 @@ static int en8811h_clk_is_enabled(struct clk_hw *hw) return (pbus_value & EN8811H_CLK_CGM_CKO); } +static void en8811h_clk_restore_context(struct clk_hw *hw) +{ + if (!__clk_get_enable_count(hw->clk)) + en8811h_clk_disable(hw); + else + en8811h_clk_enable(hw); +} + static const struct clk_ops en8811h_clk_ops = { - .recalc_rate = en8811h_clk_recalc_rate, - .enable = en8811h_clk_enable, - .disable = en8811h_clk_disable, - .is_enabled = en8811h_clk_is_enabled, + .recalc_rate = en8811h_clk_recalc_rate, + .enable = en8811h_clk_enable, + .disable = en8811h_clk_disable, + .is_enabled = en8811h_clk_is_enabled, + .restore_context = en8811h_clk_restore_context, }; static int en8811h_clk_provider_setup(struct device *dev, struct clk_hw *hw)
@@ -1149,6 +1159,13 @@ static irqreturn_t en8811h_handle_interrupt(struct phy_device *phydev) return IRQ_HANDLED; } +static int en8811h_resume(struct phy_device *phydev) +{ + clk_restore_context(); + + return genphy_resume(phydev); +} + static struct phy_driver en8811h_driver[] = { { PHY_ID_MATCH_MODEL(EN8811H_PHY_ID),
@@ -1159,6 +1176,8 @@ static struct phy_driver en8811h_driver[] = { .get_rate_matching = en8811h_get_rate_matching, .config_aneg = en8811h_config_aneg, .read_status = en8811h_read_status, + .resume = en8811h_resume, + .suspend = genphy_suspend, .config_intr = en8811h_clear_intr, .handle_interrupt = en8811h_handle_interrupt, .led_hw_is_supported = en8811h_led_hw_is_supported, --
2.34.1