[PATCH v2 00/14] further mt7988 devicetree work
From: Frank Wunderlich <hidden>
Date: 2025-05-16 18:02:04
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, lkml
From: Frank Wunderlich <redacted> This series continues mt7988 devicetree work - Add SPI with BPI-R4 nand to reach eMMC - Add thermal protection (fan+cooling-points) - Extend cpu frequency scaling with CCI - Basic network-support (ethernet controller + builtin switch + SFP Cages) depencies (i hope this list is complete and latest patches/series linked): "Add Bananapi R4 variants and add xsphy" (reviewed, partially applied): https://patchwork.kernel.org/project/linux-mediatek/list/?series=955733 "net: phy: mediatek: do not require syscon compatible for pio property": https://patchwork.kernel.org/project/netdevbpf/patch/20250510174933.154589-1-linux@fw-web.de/ for phy led function (RFC not yet reviewed, resent without RFC) for 2.5g phy function (currently disabled): - net: ethernet: mtk_eth_soc: add support for MT7988 internal 2.5G PHY (already merged to 6.15-net-next) - net: phy: mediatek: add driver for built-in 2.5G ethernet PHY on MT7988 https://patchwork.kernel.org/project/netdevbpf/patch/20250516102327.2014531-3-SkyLake.Huang@mediatek.com/ (v4) for SFP-Function (macs currently disabled): PCS clearance which is a 1.5 year discussion currently ongoing e.g. something like this (one of): * https://patchwork.kernel.org/project/netdevbpf/patch/20250511201250.3789083-4-ansuelsmth@gmail.com/ (v4) * https://patchwork.kernel.org/project/netdevbpf/patch/20250512161013.731955-4-sean.anderson@linux.dev/ (v4) * https://patchwork.kernel.org/project/netdevbpf/patch/ba4e359584a6b3bc4b3470822c42186d5b0856f9.1721910728.git.daniel@makrotopia.org/ full usxgmii driver: https://patchwork.kernel.org/project/netdevbpf/patch/07845ec900ba41ff992875dce12c622277592c32.1702352117.git.daniel@makrotopia.org/ first PCS-discussion is here: https://patchwork.kernel.org/project/netdevbpf/patch/8aa905080bdb6760875d62cb3b2b41258837f80e.1702352117.git.daniel@makrotopia.org/ and then dts nodes for sgmiisys+usxgmii when above depencies are solved the mac1/2 can be enabled and 2.5G phy/SFP slots will work. changes: v2: - change reg to list of items in eth binding - changed mt7530 binding: - unevaluatedProperties=false - mediatek,pio subproperty - from patternProperty to property - board specific properties like led function and labels moved to bpi-r4 dtsi Frank Wunderlich (14): dt-bindings: net: mediatek,net: update for mt7988 dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for mt7988 dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus arm64: dts: mediatek: mt7988: add spi controllers arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi arm64: dts: mediatek: mt7988: add cci node arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes arm64: dts: mediatek: mt7988: add basic ethernet-nodes arm64: dts: mediatek: mt7988: add switch node arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds .../bindings/net/dsa/mediatek,mt7530.yaml | 24 +- .../devicetree/bindings/net/mediatek,net.yaml | 10 +- .../mediatek/mt7988a-bananapi-bpi-r4-2g5.dts | 11 + .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 18 + .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 158 ++++++- arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 389 +++++++++++++++++- 6 files changed, 590 insertions(+), 20 deletions(-) -- 2.43.0