On Sun, Mar 09, 2025 at 05:36:49PM +0000, Russell King (Oracle) wrote:

On Sun, Mar 09, 2025 at 06:26:52PM +0100, Christian Marangi wrote:

quoted

+/* If a non empty valid_addr_mask is passed, PHY address and
+ * read/write register are encoded in the regmap register
+ * by placing the register in the first 16 bits and the PHY address
+ * right after.
+ */
+#define MDIO_REGMAP_PHY_ADDR		GENMASK(20, 16)
+#define MDIO_REGMAP_PHY_REG		GENMASK(15, 0)

Clause 45 PHYs have 5 bits of PHY address, then 5 bits of mmd address,
and then 16 bits of register address - significant in that order. Can
we adjust the mask for the PHY address later to add the MMD between
the PHY address and register number?

Honestly to future proof this, I think a good idea might be to add
helper to encode these info and use Clause 45 format even for C22.
Maybe we can use an extra bit to signal if the format is C22 or C45.

BIT(26) 0: C22 1:C45
GENMASK(25, 21) PHY ADDR
GENMASK(20, 16) MMD ADDR
GENMASK(15, 0) REG

What do you think?

-- 
	Ansuel