[PATCH net-next v5 08/13] net: phy: phy_device: Use link_capabilities lookup for PHY aneg config
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2025-03-07 17:36:26
Also in:
linux-arm-kernel, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When configuring PHY advertising with autoneg disabled, we lookd for an exact linkmode to advertise and configure for the requested Speed and Duplex, specially at or over 1G. Using phy_caps_lookup allows us to build a list of the supported linkmodes at that speed that we can advertise instead of the first mode that matches. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- drivers/net/phy/phy_device.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 4980862398d0..3f734e847e8e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c@@ -2120,7 +2120,7 @@ EXPORT_SYMBOL(genphy_check_and_restart_aneg); int __genphy_config_aneg(struct phy_device *phydev, bool changed) { __ETHTOOL_DECLARE_LINK_MODE_MASK(fixed_advert); - const struct phy_setting *set; + const struct link_capabilities *c; unsigned long *advert; int err;
@@ -2146,10 +2146,11 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) } else { linkmode_zero(fixed_advert); - set = phy_lookup_setting(phydev->speed, phydev->duplex, - phydev->supported, true); - if (set) - linkmode_set_bit(set->bit, fixed_advert); + c = phy_caps_lookup(phydev->speed, phydev->duplex, + phydev->supported, true); + if (c) + linkmode_and(fixed_advert, phydev->supported, + c->linkmodes); advert = fixed_advert; }
--
2.48.1