[PATCH net-next v4 4/4] dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
flat view
STALE596d
LANDED
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: 2025-03-05 10:57:05
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
ca8210 ieee-802.15.4 radio driver, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Landed in mainline as a5d4d993fac4 on 2025-03-06.
The code has been updated to follow what datasheet says about the polarity of the reset pin, which is active-low. Update the device tree bindings accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- Documentation/devicetree/bindings/net/ieee802154/ca8210.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
index a1046e636fa1..f1bd07a0097d 100644
--- a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
+++ b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt@@ -20,7 +20,7 @@ Example: reg = <0>; spi-max-frequency = <3000000>; spi-cpol; - reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>; irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; extclock-enable; extclock-freq = 16000000;
--
2.47.2