Thread (16 messages) 16 messages, 3 authors, 2025-02-20
STALE500d REVIEWED: 3 (3M)

[PATCH net-next 05/12] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2025-02-19 11:34:04
Also in: linux-can
Subsystem: can network drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Marc Kleine-Budde, Vincent Mailhol, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Add S32G2/S32G3 SoCs compatible strings.

A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.

Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.

Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250113120704.522307-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../bindings/net/can/fsl,flexcan.yaml         | 44 +++++++++++++++++--
 1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 97dd1a7c5ed2..73252fe56fe6 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -10,9 +10,6 @@ title:
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -28,6 +25,7 @@ properties:
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+          - nxp,s32g2-flexcan
       - items:
           - enum:
               - fsl,imx53-flexcan
@@ -43,12 +41,21 @@ properties:
           - enum:
               - fsl,ls1028ar1-flexcan
           - const: fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - nxp,s32g3-flexcan
+          - const: nxp,s32g2-flexcan
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
 
   clocks:
     maxItems: 2
@@ -136,6 +143,35 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-flexcan
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
+            - description: Device state change
+            - description: Bus Error detection
+            - description: Message Buffer interrupt for mailboxes 8-127
+        interrupt-names:
+          items:
+            - const: mb-0
+            - const: state
+            - const: berr
+            - const: mb-1
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names: false
+
 additionalProperties: false
 
 examples:
-- 
2.47.2

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help