On Fri, 21 Feb 2025 14:49:21 +0100
Oleksij Rempel [off-list ref] wrote:
Hi Kory,
On Tue, Feb 18, 2025 at 05:19:11PM +0100, Kory Maincent wrote:
quoted
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Thank you! Here are some comments...
quoted
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1790,6 +1790,12 @@ Kernel response contents:
``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit
configuration ranges.
``ETHTOOL_A_PSE_PW_D_ID`` u32 Index of the PSEpower domain
+ ``ETHTOOL_A_C33_PSE_BUDGET_EVAL_STRAT`` u32 Budget evaluation
strategy
+ of the PSE
+ ``ETHTOOL_A_C33_PSE_PRIO_MAX`` u32 Priority maximum
configurable
+ on the PoE PSE
+ ``ETHTOOL_A_C33_PSE_PRIO`` u32 Priority of the PoE
PSE
+ currently configured
Please remove _C33_ from these fields, as they are not specific to Clause 33.
Oops, forgot to update the documentation accordingly. Thanks for spotting it.
--
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com