Re: [PATCH v5 2/4] dt-bindings: mfd: Add MDIO interface to rtl9301-switch
From: Daniel Golle <daniel@makrotopia.org>
Date: 2025-01-31 07:00:11
Also in:
linux-devicetree, linux-mips, lkml
Hi Chris, afaik net-next is still closed right now, but lets discuss the series as RFC in the meantime maybe, right? On Fri, Jan 31, 2025 at 02:01:49PM +1300, Chris Packham wrote:
quoted hunk ↗ jump to hunk
The MDIO controller is part of the switch on the RTL9300 family of devices. Add a $ref to the mfd binding for these devices. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: This patch is dependent on "dt-bindings: net: Add Realtek MDIO controller" which adds the realtek,rtl9301-mdio.yaml binding. Changes in v5: - Note dependency on realtek,rtl9301-mdio.yaml patch - Add back reg property to the mdio-controller node. Changes in v4: - There is a single MDIO controller that has MDIO buses as children Changes in v3: - None Changes in v2: - None .../bindings/mfd/realtek,rtl9301-switch.yaml | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+)diff --git a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml index f053303ab1e6..89e10213a4ee 100644 --- a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml +++ b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml@@ -28,6 +28,9 @@ properties: reg: maxItems: 1 + mdio-controller: + $ref: /schemas/net/realtek,rtl9301-mdio.yaml# + '#address-cells': const: 1@@ -41,6 +44,10 @@ patternProperties: 'i2c@[0-9a-f]+$': $ref: /schemas/i2c/realtek,rtl9301-i2c.yaml# + 'mdio-controller@[0-9a-f]+$': + $ref: /schemas/net/realtek,rtl9301-mdio.yaml# + + required: - compatible - reg@@ -110,5 +117,27 @@ examples: }; }; }; + + mdio-controller@ca00 { + compatible = "realtek,rtl9301-mdio"; + reg = <0xca00 0x200>; + #address-cells = <1>; + #size-cells = <0>; + + mdio-bus@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + realtek,port = <1>;
Aren't all those PHYs referenced as phandles by DSA switch ports? Imho it would be better to not introduce a new property but instead let the driver of the mdio-controller parse the DSA switch description and follow the existing 'phy-handle' properties in order to infer the mapping of all ports to all PHYs, and by that then be able to also know the reverse mapping. You could reference the switch node in the mdio-controller node. That would avoid redundant information in the device tree, as we would then only have one mapping instead of having it two times (once by the usual 'phy-handle' property of the DSA user port and another time reverse using your newly introduce 'realtek,port' property of each ethernet-phy).
+ };
+ ethernet-phy@1 {
+ reg = <1>;
+ realtek,port = <0>;
+ };
+ };
+ };
};
--
2.48.1