On 23/01/2025 at 18:11, Ming Yu wrote:

This driver supports Hardware monitor functionality for NCT6694 MFD
device based on USB interface.

Signed-off-by: Ming Yu <redacted>
---

(...)

+static int nct6694_temp_write(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
+	struct nct6694_cmd_header cmd_hd;
+	unsigned char temp_hyst;
+	signed char temp_max;
+	int ret;
+
+	guard(mutex)(&data->lock);
+
+	switch (attr) {
+	case hwmon_temp_enable:
+		if (val == 0)
+			data->hwmon_en.tin_en[channel / 8] &= ~BIT(channel % 8);
+		else if (val == 1)
+			data->hwmon_en.tin_en[channel / 8] |= BIT(channel % 8);
+		else
+			return -EINVAL;
+
+		cmd_hd = (struct nct6694_cmd_header) {
+			.mod = NCT6694_HWMON_MOD,
+			.cmd = NCT6694_HWMON_CONTROL,
+			.sel = NCT6694_HWMON_CONTROL_SEL,
+			.len = cpu_to_le16(sizeof(data->hwmon_en))
+		};
+
+		return nct6694_write_msg(data->nct6694, &cmd_hd,
+					 &data->hwmon_en);
+	case hwmon_temp_max:
+		cmd_hd = (struct nct6694_cmd_header) {
+			.mod = NCT6694_HWMON_MOD,
+			.cmd = NCT6694_HWMON_ALARM,
+			.sel = NCT6694_HWMON_ALARM_SEL,
+			.len = cpu_to_le16(sizeof(data->msg->hwmon_alarm))
+		};
+		ret = nct6694_read_msg(data->nct6694, &cmd_hd,
+				       &data->msg->hwmon_alarm);
+		if (ret)
+			return ret;
+
+		val = clamp_val(val, -127000, 127000);
+		data->msg->hwmon_alarm.tin_cfg[channel].hl = temp_to_reg(val);
+
+		return nct6694_write_msg(data->nct6694, &cmd_hd,
+					 &data->msg->hwmon_alarm);
+	case hwmon_temp_max_hyst:
+		cmd_hd = (struct nct6694_cmd_header) {
+			.mod = NCT6694_HWMON_MOD,
+			.cmd = NCT6694_HWMON_ALARM,
+			.sel = NCT6694_HWMON_ALARM_SEL,
+			.len = cpu_to_le16(sizeof(data->msg->hwmon_alarm))
+		};
+		ret = nct6694_read_msg(data->nct6694, &cmd_hd,
+				       &data->msg->hwmon_alarm);
+
+		val = clamp_val(val, -127000, 127000);
+		temp_max = data->msg->hwmon_alarm.tin_cfg[channel].hl;
+		temp_hyst = temp_max - temp_to_reg(val);
+		temp_hyst = clamp_val(temp_hyst, 0, 7);

temp_hyst is unsigned. It can not be smaller than zero. No need for
clamp(), using min here is sufficient.

+		data->msg->hwmon_alarm.tin_cfg[channel].hyst =
+			(data->msg->hwmon_alarm.tin_cfg[channel].hyst & ~NCT6694_TIN_HYST_MASK) |
+			FIELD_PREP(NCT6694_TIN_HYST_MASK, temp_hyst);
+
+		return nct6694_write_msg(data->nct6694, &cmd_hd,
+					 &data->msg->hwmon_alarm);
+	default:
+		return -EOPNOTSUPP;
+	}
+}

(...)

Yours sincerely,
Vincent Mailhol