[PATCH net-next] dt-bindings: net: Correct indentation and style in DTS example
From: Krzysztof Kozlowski <hidden>
Date: 2025-01-07 12:56:20
Also in:
linux-amlogic, linux-arm-kernel, linux-can, linux-devicetree, linux-wireless, lkml
Subsystem:
broadcom genet ethernet driver, can network drivers, networking drivers, networking drivers (wireless), open firmware and flattened device tree bindings, the rest · Maintainers:
Doug Berger, Florian Fainelli, Marc Kleine-Budde, Vincent Mailhol, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Johannes Berg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../bindings/net/amlogic,meson-dwmac.yaml | 14 +-- .../devicetree/bindings/net/asix,ax88178.yaml | 4 +- .../bindings/net/brcm,bcmgenet.yaml | 32 +++---- .../bindings/net/brcm,mdio-mux-iproc.yaml | 46 ++++----- .../bindings/net/can/bosch,c_can.yaml | 10 +- .../bindings/net/can/microchip,mcp2510.yaml | 18 ++-- .../devicetree/bindings/net/stm32-dwmac.yaml | 94 +++++++++---------- .../bindings/net/ti,davinci-mdio.yaml | 10 +- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 20 ++-- .../bindings/net/ti,k3-am654-cpts.yaml | 36 +++---- .../bindings/net/wireless/marvell,sd8787.yaml | 17 ++-- 11 files changed, 150 insertions(+), 151 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index d1e2bca3c503..798a4c19f18c 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml@@ -166,11 +166,11 @@ unevaluatedProperties: false examples: - | ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0xc9410000 0x10000>, <0xc8834540 0x8>; - interrupts = <8>; - interrupt-names = "macirq"; - clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>; - clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; - phy-mode = "rgmii"; + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000>, <0xc8834540 0x8>; + interrupts = <8>; + interrupt-names = "macirq"; + clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; + phy-mode = "rgmii"; };
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
index 768504ccbf74..03341b7438d5 100644
--- a/Documentation/devicetree/bindings/net/asix,ax88178.yaml
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml@@ -63,8 +63,8 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usbb95,772b"; - reg = <1>; + compatible = "usbb95,772b"; + reg = <1>; }; }; };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 7c90a4390531..0e3fb4e42e3f 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml@@ -85,16 +85,16 @@ examples: #size-cells = <1>; mdio0: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; - phy1: ethernet-phy@1 { + phy1: ethernet-phy@1 { max-speed = <1000>; reg = <1>; compatible = "ethernet-phy-ieee802.3-c22"; - }; + }; }; };
@@ -110,10 +110,10 @@ examples: interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; mdio1: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; }; };
@@ -129,15 +129,15 @@ examples: interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; mdio2: mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xe14 0x8>; + compatible = "brcm,genet-mdio-v4"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe14 0x8>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { max-speed = <1000>; reg = <0>; compatible = "ethernet-phy-ieee802.3-c22"; - }; + }; }; };
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
index af96b4fd89d5..3f27746d9a56 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml@@ -38,43 +38,43 @@ unevaluatedProperties: false examples: - | - mdio_mux_iproc: mdio-mux@66020000 { + mdio-mux@66020000 { compatible = "brcm,mdio-mux-iproc"; reg = <0x66020000 0x250>; #address-cells = <1>; #size-cells = <0>; mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; }; mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - }; + pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; }; mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; - gphy0: eth-phy@10 { - reg = <0x10>; - }; + eth-phy@10 { + reg = <0x10>; + }; }; };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 4d7d67ee175a..ff1b59a0294e 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml@@ -99,11 +99,11 @@ examples: #include <dt-bindings/reset/altr,rst-mgr.h> can@ffc00000 { - compatible = "bosch,d_can"; - reg = <0xffc00000 0x1000>; - interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; - clocks = <&can0_clk>; - resets = <&rst CAN0_RESET>; + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; }; - | can@0 {
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
index db446dde6842..e0ec53bc10c6 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml@@ -56,15 +56,15 @@ examples: #size-cells = <0>; can@1 { - compatible = "microchip,mcp2515"; - reg = <1>; - clocks = <&clk24m>; - interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <®5v0>; - xceiver-supply = <®5v0>; - gpio-controller; - #gpio-cells = <2>; + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk24m>; + interrupt-parent = <&gpio4>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + gpio-controller; + #gpio-cells = <2>; }; };
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index bf23838fe6e8..85cea9966a27 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml@@ -154,56 +154,56 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> //Example 1 - ethernet0: ethernet@5800a000 { - compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; - reg = <0x5800a000 0x2000>; - reg-names = "stmmaceth"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clock-names = "stmmaceth", - "mac-clk-tx", - "mac-clk-rx", - "ethstp", - "eth-ck"; - clocks = <&rcc ETHMAC>, - <&rcc ETHTX>, - <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc ETHCK_K>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <2>; - snps,axi-config = <&stmmac_axi_config_0>; - snps,tso; - phy-mode = "rgmii"; - }; + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + phy-mode = "rgmii"; + }; - | //Example 2 (MCU example) - ethernet1: ethernet@40028000 { - compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 61 0>, <0 62 0>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - snps,mixed-burst; - phy-mode = "mii"; - }; + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + phy-mode = "mii"; + }; - | //Example 3 - ethernet2: ethernet@40027000 { - compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; - reg = <0x40028000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <61>; - interrupt-names = "macirq"; - clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; - st,syscon = <&syscfg 0x4>; - snps,pbl = <8>; - phy-mode = "mii"; - }; + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + phy-mode = "mii"; + };
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 53604fab0b73..08119b6880ee 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml@@ -72,9 +72,9 @@ unevaluatedProperties: false examples: - | davinci_mdio: mdio@4a101000 { - compatible = "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4a101000 0x1000>; - bus_freq = <1000000>; + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a101000 0x1000>; + bus_freq = <1000000>; };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 02b6d32003cc..b11894fbaec4 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml@@ -302,16 +302,16 @@ examples: ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; }; }; - }; - cpts@3d000 { - compatible = "ti,am65-cpts"; - reg = <0x0 0x3d000 0x0 0x400>; - clocks = <&k3_clks 18 2>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; }; };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 3888692275ad..3572749147fb 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml@@ -131,23 +131,23 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> cpts@310d0000 { - compatible = "ti,am65-cpts"; - reg = <0x310d0000 0x400>; - reg-names = "cpts"; - clocks = <&main_cpts_mux>; - clock-names = "cpts"; - interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-periodic-outputs = <6>; - ti,cpts-ext-ts-inputs = <8>; + compatible = "ti,am65-cpts"; + reg = <0x310d0000 0x400>; + reg-names = "cpts"; + clocks = <&main_cpts_mux>; + clock-names = "cpts"; + interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; - main_cpts_mux: refclk-mux { - #clock-cells = <0>; - clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, - <&k3_clks 157 91>, <&k3_clks 157 77>, - <&k3_clks 157 102>, <&k3_clks 157 80>, - <&k3_clks 120 3>, <&k3_clks 121 3>; - assigned-clocks = <&main_cpts_mux>; - assigned-clock-parents = <&k3_clks 118 11>; - }; + main_cpts_mux: refclk-mux { + #clock-cells = <0>; + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, + <&k3_clks 157 91>, <&k3_clks 157 77>, + <&k3_clks 157 102>, <&k3_clks 157 80>, + <&k3_clks 120 3>, <&k3_clks 121 3>; + assigned-clocks = <&main_cpts_mux>; + assigned-clock-parents = <&k3_clks 118 11>; + }; };
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
index 1715b22e0dcf..930b700b73d0 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml@@ -79,15 +79,14 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> mmc { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - wifi@1 { - compatible = "marvell,sd8897"; - reg = <1>; - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = <3>; + wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; }; }; -
--
2.43.0