[PATCH v2 3/4] arm: dts: stm32: Add thermal support for STM32MP131
flat view
STALE675d
SUPERSEDED
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2024-12-09 10:34:54
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
From: Roan van Dijk <roan@protonic.nl> Add thermal zone configuration and sensor node for STM32MP131 SoC. Signed-off-by: Roan van Dijk <roan@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/st/stm32mp131.dtsi | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index e1a764d269d2..56660e67a2a2 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi@@ -100,6 +100,31 @@ timer { always-on; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&dts>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <85000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu-crit { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>;
@@ -909,6 +934,16 @@ timer { }; }; + dts: thermal@50028000 { + compatible = "st,stm32-thermal"; + reg = <0x50028000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DTS>; + clock-names = "pclk"; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>;
--
2.39.5