[PATCH v4 11/16] net: xgene_enet: Use helper rgmii_clock
From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@kernel.org>
Date: 2024-10-28 20:25:28
Also in:
b4-sent, imx, linux-arm-kernel, linux-arm-msm, linux-devicetree, lkml
Subsystem:
applied micro (apm) x-gene soc ethernet driver, networking drivers, the rest · Maintainers:
Iyappan Subramanian, Keyur Chudgar, Quan Nguyen, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com> Utilize a new helper function rgmii_clock(). Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com> --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index e641dbbea1e2..b854b6b42d77 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c@@ -421,18 +421,12 @@ static void xgene_enet_configure_clock(struct xgene_enet_pdata *pdata) if (dev->of_node) { struct clk *parent = clk_get_parent(pdata->clk); + long rate = rgmii_clock(pdata->phy_speed); - switch (pdata->phy_speed) { - case SPEED_10: - clk_set_rate(parent, 2500000); - break; - case SPEED_100: - clk_set_rate(parent, 25000000); - break; - default: - clk_set_rate(parent, 125000000); - break; - } + if (rate < 0) + rate = 125000000; + + clk_set_rate(parent, rate); } #ifdef CONFIG_ACPI else {
--
2.46.0