Re: [RFC PATCH net-next] net: bridge: drop packets with a local source

Am 19.09.24 um 12:33 schrieb Nikolay Aleksandrov:

On 19/09/2024 11:58, Thomas Martitz wrote:

quoted

Currently, there is only a warning if a packet enters the bridge
that has the bridge's or one port's MAC address as source.

Clearly this indicates a network loop (or even spoofing) so we
generally do not want to process the packet. Therefore, move the check
already done for 802.1x scenarios up and do it unconditionally.

For example, a common scenario we see in the field:
In a accidental network loop scenario, if an IGMP join
loops back to us, it would cause mdb entries to stay indefinitely
even if there's no actual join from the outside. Therefore
this change can effectively prevent multicast storms, at least
for simple loops.

Signed-off-by: Thomas Martitz <redacted>
---
  net/bridge/br_fdb.c   |  4 +---
  net/bridge/br_input.c | 17 ++++++++++-------
  2 files changed, 11 insertions(+), 10 deletions(-)

Absolutely not, I'm sorry but we're not all going to take a performance hit
of an additional lookup because you want to filter src address. You can 
filter
it in many ways that won't affect others and don't require kernel changes
(ebpf, netfilter etc). To a lesser extent there is also the issue where 
we might
break some (admittedly weird) setup.

Hello Nikolay,

thanks for taking a look at the patch. I expected concerns, therefore 
the RFC state.

So I understand that performance is your main concern. Some users might
be willing to pay for that cost, however, in exchange for increased
system robustness. May I suggest per-bridge or even per-port flags to
opt-in to this behavior? We'd set this from our userspace. This would
also address the concern to not break weird, existing setups.

This would be analogous to the check added for MAB in 2022
(commit a35ec8e38cdd "bridge: Add MAC Authentication Bypass (MAB) support").

While there are maybe other methods, only in the bridge code I may
access the resulting FDB to test for the BR_FDB_LOCAL flag. There's
typically not only a single MAC adress to check for, but such a local
FDB is maintained for the enslaved port's MACs as well. Replicating
the check outside of the bridge receive code would be orders more
complex. For example, you need to update the filter each time a port is
added or removed from the bridge.

Since a very similar check exists already using a per-port opt-in flag,
would a similar approach acceptable for you? If yes, I'd send a
follow-up shortly.

PS: I haven't spottet you, but in case you're at LPC in Vienna we can
chat in person about it, I'm here.

Best regards.

Cheers,
  Nik