Re: [PATCH net-next v7 3/7] net: stmmac: refactor FPE verification process

On Wed, Sep 04, 2024 at 05:21:18PM +0800, Furong Xu wrote:

+/**
+ * stmmac_fpe_verify_timer - Timer for MAC Merge verification
+ * @t:  timer_list struct containing private info
+ *
+ * Verify the MAC Merge capability in the local TX direction, by
+ * transmitting Verify mPackets up to 3 times. Wait until link
+ * partner responds with a Response mPacket, otherwise fail.
+ */
+static void stmmac_fpe_verify_timer(struct timer_list *t)
 {
-	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
-						fpe_task);
-	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
-	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
-	bool *hs_enable = &fpe_cfg->hs_enable;
-	bool *enable = &fpe_cfg->enable;
-	int retries = 20;
-
-	while (retries-- > 0) {
-		/* Bail out immediately if FPE handshake is OFF */
-		if (*lo_state == FPE_STATE_OFF || !*hs_enable)
-			break;
-
-		if (*lo_state == FPE_STATE_ENTERING_ON &&
-		    *lp_state == FPE_STATE_ENTERING_ON) {
-			stmmac_fpe_configure(priv, priv->ioaddr,
-					     fpe_cfg,
-					     priv->plat->tx_queues_to_use,
-					     priv->plat->rx_queues_to_use,
-					     *enable);
-
-			netdev_info(priv->dev, "configured FPE\n");
+	struct stmmac_fpe_cfg *fpe_cfg = from_timer(fpe_cfg, t, verify_timer);
+	struct stmmac_priv *priv = container_of(fpe_cfg, struct stmmac_priv,
+						fpe_cfg);
+	struct ethtool_mm_state *state = &fpe_cfg->state;
+	unsigned long flags;
+	bool rearm = false;
 
-			*lo_state = FPE_STATE_ON;
-			*lp_state = FPE_STATE_ON;
-			netdev_info(priv->dev, "!!! BOTH FPE stations ON\n");
-			break;
-		}
+	spin_lock_irqsave(&fpe_cfg->lock, flags);
 
-		if ((*lo_state == FPE_STATE_CAPABLE ||
-		     *lo_state == FPE_STATE_ENTERING_ON) &&
-		     *lp_state != FPE_STATE_ON) {
-			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
-				    *lo_state, *lp_state);
+	switch (state->verify_status) {
+	case ETHTOOL_MM_VERIFY_STATUS_INITIAL:
+	case ETHTOOL_MM_VERIFY_STATUS_VERIFYING:
+		if (fpe_cfg->verify_retries != 0) {
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
-						fpe_cfg,
-						MPACKET_VERIFY);
+						fpe_cfg, MPACKET_VERIFY);
+			rearm = true;
+		} else {
+			state->verify_status = ETHTOOL_MM_VERIFY_STATUS_FAILED;
 		}
-		/* Sleep then retry */
-		msleep(500);
+
+		fpe_cfg->verify_retries--;
+	break;

Odd indentation... "break;" should be on the same level with the code,
not with the "case" statements. Not sure which editor you use, but even
if you hit "==" in vim on this line, it will shift it by one tab to the
right.

+
+	case ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED:
+		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+				     priv->plat->tx_queues_to_use,
+				     priv->plat->rx_queues_to_use,
+				     true, true);
+	break;

Same comment here and below.

+
+	default:
+	break;
+	}
+
+	if (rearm) {
+		mod_timer(&fpe_cfg->verify_timer,
+			  jiffies + msecs_to_jiffies(state->verify_time));
 	}
 
-	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
+	spin_unlock_irqrestore(&fpe_cfg->lock, flags);
+}