Hi Krzysztof,

On 10:49 Wed 21 Aug     , Krzysztof Kozlowski wrote:

On Tue, Aug 20, 2024 at 04:36:12PM +0200, Andrea della Porta wrote:

quoted

RaspberryPi RP1 contains Cadence's MACB core. Implement the
changes to be able to operate the customization in the RP1.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>

quoted

@@ -5100,6 +5214,11 @@ static int macb_probe(struct platform_device *pdev)
 			}
 		}
 	}
+
+	device_property_read_u8(&pdev->dev, "cdns,aw2w-max-pipe", &bp->aw2w_max_pipe);
+	device_property_read_u8(&pdev->dev, "cdns,ar2r-max-pipe", &bp->ar2r_max_pipe);

Where are the bindings?

As stated in the cover letter, this patch (and the dtb patch #11 for macb) is completely
unpolished and intended only for a quick test of the ethernet peripheral underneath
the RP1.  As such, it's not intended to be upstreamed yet.
However, your feedback is really appreaciated and will be used in a future patch that
will deal with ethernet mac support.

quoted

+	bp->use_aw2b_fill = device_property_read_bool(&pdev->dev, "cdns,use-aw2b-fill");
+
 	spin_lock_init(&bp->lock);
 
 	/* setup capabilities */

@@ -5155,6 +5274,21 @@ static int macb_probe(struct platform_device *pdev)
 	else
 		bp->phy_interface = interface;
 
+	/* optional PHY reset-related properties */
+	bp->phy_reset_gpio = devm_gpiod_get_optional(&pdev->dev, "phy-reset",

Where is the binding?

Ditto.

quoted

+						     GPIOD_OUT_LOW);
+	if (IS_ERR(bp->phy_reset_gpio)) {
+		dev_err(&pdev->dev, "Failed to obtain phy-reset gpio\n");
+		err = PTR_ERR(bp->phy_reset_gpio);
+		goto err_out_free_netdev;
+	}
+
+	bp->phy_reset_ms = 10;
+	of_property_read_u32(np, "phy-reset-duration", &bp->phy_reset_ms);

Where is the binding?

Ditto.

Cheers,
Andrea

quoted

+	/* A sane reset duration should not be longer than 1s */
+	if (bp->phy_reset_ms > 1000)
+		bp->phy_reset_ms = 1000;
+
 	/* IP specific init */
 	err = init(pdev);

Best regards,
Krzysztof