From: Lorenzo Bianconi <redacted>
Date: Tue, 13 Aug 2024 18:27:41 +0200

On Aug 13, Alexander Lobakin wrote:

quoted

From: Alexander Lobakin <aleksander.lobakin@intel.com>
Date: Thu, 8 Aug 2024 13:57:00 +0200

quoted

From: Lorenzo Bianconi <redacted>
Date: Thu, 8 Aug 2024 06:54:06 +0200

quoted

quoted

Hi Alexander,

On Tue, Jun 28, 2022, at 12:47 PM, Alexander Lobakin wrote:

quoted

cpumap has its own BH context based on kthread. It has a sane batch
size of 8 frames per one cycle.
GRO can be used on its own, adjust cpumap calls to the
upper stack to use GRO API instead of netif_receive_skb_list() which
processes skbs by batches, but doesn't involve GRO layer at all.
It is most beneficial when a NIC which frame come from is XDP
generic metadata-enabled, but in plenty of tests GRO performs better
than listed receiving even given that it has to calculate full frame
checksums on CPU.
As GRO passes the skbs to the upper stack in the batches of
@gro_normal_batch, i.e. 8 by default, and @skb->dev point to the
device where the frame comes from, it is enough to disable GRO
netdev feature on it to completely restore the original behaviour:
untouched frames will be being bulked and passed to the upper stack
by 8, as it was with netif_receive_skb_list().

Signed-off-by: Alexander Lobakin <redacted>
---
 kernel/bpf/cpumap.c | 43 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 38 insertions(+), 5 deletions(-)

AFAICT the cpumap + GRO is a good standalone improvement. I think
cpumap is still missing this.

The only concern for having GRO in cpumap without metadata from the NIC
descriptor was that when the checksum status is missing, GRO calculates
the checksum on CPU, which is not really fast.
But I remember sometimes GRO was faster despite that.

quoted

quoted

I have a production use case for this now. We want to do some intelligent
RX steering and I think GRO would help over list-ified receive in some cases.
We would prefer steer in HW (and thus get existing GRO support) but not all
our NICs support it. So we need a software fallback.

Are you still interested in merging the cpumap + GRO patches?

For sure I can revive this part. I was planning to get back to this
branch and pick patches which were not related to XDP hints and send
them separately.

quoted

Hi Daniel and Alex,

Recently I worked on a PoC to add GRO support to cpumap codebase:
- https://github.com/LorenzoBianconi/bpf-next/commit/a4b8264d5000ecf016da5a2dd9ac302deaf38b3e
  Here I added GRO support to cpumap through gro-cells.
- https://github.com/LorenzoBianconi/bpf-next/commit/da6cb32a4674aa72401c7414c9a8a0775ef41a55
  Here I added GRO support to cpumap trough napi-threaded APIs (with a some
  changes to them).

Hmm, when I was testing it, adding a whole NAPI to cpumap was sorta
overkill, that's why I separated GRO structure from &napi_struct.

Let me maybe find some free time, I would then test all 3 solutions
(mine, gro_cells, threaded NAPI) and pick/send the best?

quoted

Please note I have not run any performance tests so far, just verified it does
not crash (I was planning to resume this work soon). Please let me know if it
works for you.

I did tests on both threaded NAPI for cpumap and my old implementation
with a traffic generator and I have the following (in Kpps):

            direct Rx    direct GRO    cpumap    cpumap GRO
baseline    2900         5800          2700      2700 (N/A)
threaded                               2300      4000
old GRO                                2300      4000

out of my curiority, have you tested even the gro_cells one?

I haven't. I mean I could, but I don't feel like cpumap's kthread +
separate NAPI then could give better results than merged NAPI + kthread.

Lorenzo

Thanks,
Olek