Re: [PATCH V5 net-next 3/3] virtio-net: synchronize operstate with admin state on up/down
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: 2024-08-05 05:52:32
Also in:
lkml, virtualization
On Mon, Aug 05, 2024 at 11:02:42AM +0800, Jason Wang wrote:
This patch synchronize operstate with admin state per RFC2863.
synchronizes
This is done by trying to toggle the carrier upon open/close and synchronize with the config change work. This allows propagate status
to propagate
correctly to stacked devices like:
ip link add link enp0s3 macvlan0 type macvlan
ip link set link enp0s3 down
ip link show
Before this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
......
5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
After this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
...
5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ffAdd an empty line here pls.
quoted hunk ↗ jump to hunk
Cc: Venkat Venkatsubra <redacted> Cc: Gia-Khanh Nguyen <redacted> Signed-off-by: Jason Wang <jasowang@redhat.com> --- drivers/net/virtio_net.c | 78 +++++++++++++++++++++++++--------------- 1 file changed, 50 insertions(+), 28 deletions(-)diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 0383a3e136d6..fc5196ca8d51 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c@@ -2885,6 +2885,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim) net_dim_work_cancel(dim); } +static void virtnet_update_settings(struct virtnet_info *vi) +{ + u32 speed; + u8 duplex; + + if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX)) + return; + + virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed); + + if (ethtool_validate_speed(speed)) + vi->speed = speed; + + virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex); + + if (ethtool_validate_duplex(duplex)) + vi->duplex = duplex; +} + static int virtnet_open(struct net_device *dev) { struct virtnet_info *vi = netdev_priv(dev);@@ -2903,6 +2922,15 @@ static int virtnet_open(struct net_device *dev) goto err_enable_qp; } + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) { + if (vi->status & VIRTIO_NET_S_LINK_UP) + netif_carrier_on(vi->dev); + virtio_config_driver_enable(vi->vdev); + } else { + vi->status = VIRTIO_NET_S_LINK_UP; + netif_carrier_on(dev); + } + return 0; err_enable_qp:@@ -3381,12 +3409,22 @@ static int virtnet_close(struct net_device *dev) disable_delayed_refill(vi); /* Make sure refill_work doesn't re-enable napi! */ cancel_delayed_work_sync(&vi->refill); + /* Prevent the config change callback from changing carrier + * after close + */ + virtio_config_driver_disable(vi->vdev); + /* Stop getting status/speed updates: we don't care until next + * open + */ + cancel_work_sync(&vi->config_work); for (i = 0; i < vi->max_queue_pairs; i++) { virtnet_disable_queue_pair(vi, i); virtnet_cancel_dim(vi, &vi->rq[i].dim); } + netif_carrier_off(dev); + return 0; }@@ -5085,25 +5123,6 @@ static void virtnet_init_settings(struct net_device *dev) vi->duplex = DUPLEX_UNKNOWN; } -static void virtnet_update_settings(struct virtnet_info *vi) -{ - u32 speed; - u8 duplex; - - if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX)) - return; - - virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed); - - if (ethtool_validate_speed(speed)) - vi->speed = speed; - - virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex); - - if (ethtool_validate_duplex(duplex)) - vi->duplex = duplex; -} - static u32 virtnet_get_rxfh_key_size(struct net_device *dev) { return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;@@ -6514,6 +6533,9 @@ static int virtnet_probe(struct virtio_device *vdev) goto free_failover; } + /* Disable config change notification until ndo_open. */ + virtio_config_driver_disable(vi->vdev); + virtio_device_ready(vdev); virtnet_set_queues(vi, vi->curr_queue_pairs);@@ -6563,25 +6585,25 @@ static int virtnet_probe(struct virtio_device *vdev) vi->device_stats_cap = le64_to_cpu(v); } - rtnl_unlock(); - - err = virtnet_cpu_notif_add(vi); - if (err) { - pr_debug("virtio_net: registering cpu notifier failed\n"); - goto free_unregister_netdev; - } - /* Assume link up if device can't report link status, otherwise get link status from config. */ netif_carrier_off(dev); if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) { - schedule_work(&vi->config_work); + virtnet_config_changed_work(&vi->config_work); } else { vi->status = VIRTIO_NET_S_LINK_UP; virtnet_update_settings(vi); netif_carrier_on(dev); } + rtnl_unlock();
OK I guess you are moving rtnl to make sure this does not run in parallel with ndo_open/close. I do, however, wonder whether ndo_set_features can happen before guest_offloads_capable calculation below. WDYT?
+ err = virtnet_cpu_notif_add(vi);
+ if (err) {
+ pr_debug("virtio_net: registering cpu notifier failed\n");
+ goto free_unregister_netdev;
+ }
+
for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
if (virtio_has_feature(vi->vdev, guest_offloads[i]))
set_bit(guest_offloads[i], &vi->guest_offloads);
--
2.31.1