[PATCH net-next v5 08/14] net: ethernet: oa_tc6: enable open alliance tc6 data communication
From: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Date: 2024-07-30 04:10:28
Also in:
linux-devicetree, linux-doc, lkml
Subsystem:
networking drivers, open alliance 10base-t1s macphy serial interface framework, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Parthiban Veerasooran, Linus Torvalds
Enabling Configuration Synchronization bit (SYNC) in the Configuration Register #0 enables data communication in the MAC-PHY. The state of this bit is reflected in the data footer SYNC bit. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> --- drivers/net/ethernet/oa_tc6.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/drivers/net/ethernet/oa_tc6.c b/drivers/net/ethernet/oa_tc6.c
index fc276d881dc9..8958af863b6e 100644
--- a/drivers/net/ethernet/oa_tc6.c
+++ b/drivers/net/ethernet/oa_tc6.c@@ -20,6 +20,10 @@ #define OA_TC6_REG_RESET 0x0003 #define RESET_SWRESET BIT(0) /* Software Reset */ +/* Configuration Register #0 */ +#define OA_TC6_REG_CONFIG0 0x0004 +#define CONFIG0_SYNC BIT(15) + /* Status Register #0 */ #define OA_TC6_REG_STATUS0 0x0008 #define STATUS0_RESETC BIT(6) /* Reset Complete */
@@ -559,6 +563,21 @@ static int oa_tc6_unmask_macphy_error_interrupts(struct oa_tc6 *tc6) return oa_tc6_write_register(tc6, OA_TC6_REG_INT_MASK0, regval); } +static int oa_tc6_enable_data_transfer(struct oa_tc6 *tc6) +{ + u32 value; + int ret; + + ret = oa_tc6_read_register(tc6, OA_TC6_REG_CONFIG0, &value); + if (ret) + return ret; + + /* Enable configuration synchronization for data transfer */ + value |= CONFIG0_SYNC; + + return oa_tc6_write_register(tc6, OA_TC6_REG_CONFIG0, value); +} + /** * oa_tc6_init - allocates and initializes oa_tc6 structure. * @spi: device with which data will be exchanged.
@@ -618,7 +637,18 @@ struct oa_tc6 *oa_tc6_init(struct spi_device *spi, struct net_device *netdev) return NULL; } + ret = oa_tc6_enable_data_transfer(tc6); + if (ret) { + dev_err(&tc6->spi->dev, "Failed to enable data transfer: %d\n", + ret); + goto phy_exit; + } + return tc6; + +phy_exit: + oa_tc6_phy_exit(tc6); + return NULL; } EXPORT_SYMBOL_GPL(oa_tc6_init);
--
2.34.1