Thread (9 messages) 9 messages, 2 authors, 2024-07-30

[PATCH net 5/7] selftests: mptcp: join: validate backup in MPJ

flat view
STALE807d SUPERSEDED: 1 (1M)

From: "Matthieu Baerts (NGI0)" <matttbe@kernel.org>
Date: 2024-07-27 10:03:39
Also in: linux-kselftest, lkml, mptcp, stable
Subsystem: kernel selftest framework, networking [general], networking [mptcp], the rest · Maintainers: Shuah Khan, Shuah Khan, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Matthieu Baerts, Mat Martineau, Linus Torvalds

Revision v1 of 4 in this series; 1 review trailer (1 from subsystem maintainers).

Revisions (4)
  1. v1
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v1 current 
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.

The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:

  MPTcpExtMPJoinSynBackupRx
  MPTcpExtMPJoinSynAckBackupRx

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 42 +++++++++++++++++++------
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 108aeeb84ef1..655715c8c6d9 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -1634,6 +1634,8 @@ chk_prio_nr()
 {
 	local mp_prio_nr_tx=$1
 	local mp_prio_nr_rx=$2
+	local mpj_syn=$3
+	local mpj_syn_ack=$4
 	local count
 
 	print_check "ptx"
@@ -1655,6 +1657,26 @@ chk_prio_nr()
 	else
 		print_ok
 	fi
+
+	print_check "syn backup"
+	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn" ]; then
+		fail_test "got $count JOIN[s] syn with Backup expected $mpj_syn"
+	else
+		print_ok
+	fi
+
+	print_check "synack backup"
+	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn_ack" ]; then
+		fail_test "got $count JOIN[s] synack with Backup expected $mpj_syn_ack"
+	else
+		print_ok
+	fi
 }
 
 chk_subflow_nr()
@@ -2612,7 +2634,7 @@ backup_tests()
 		sflags=nobackup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 	fi
 
 	# single address, backup
@@ -2625,7 +2647,7 @@ backup_tests()
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	# single address with port, backup
@@ -2638,7 +2660,7 @@ backup_tests()
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	if reset "mpc backup" &&
@@ -2647,7 +2669,7 @@ backup_tests()
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc backup both sides" &&
@@ -2657,7 +2679,7 @@ backup_tests()
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	if reset "mpc switch to backup" &&
@@ -2666,7 +2688,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc switch to backup both sides" &&
@@ -2676,7 +2698,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 }
 
@@ -3053,7 +3075,7 @@ fullmesh_tests()
 		addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 
@@ -3066,7 +3088,7 @@ fullmesh_tests()
 		sflags=nobackup,nofullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 }
@@ -3318,7 +3340,7 @@ userspace_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 0
-		chk_prio_nr 0 0
+		chk_prio_nr 0 0 0 0
 	fi
 
 	# userspace pm type prevents rm_addr

-- 
2.45.2
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help