[PATCH net-next v16 00/14] Introduce PHY listing and link_topology tracking
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2024-07-05 13:27:10
Also in:
linux-arm-kernel, lkml
Hello everyone, This is V16 of the phy_link_topology series, aiming at improving support for multiple PHYs being attached to the same MAC. There are 2 changes in V16 compared to V15 : - In patch 4, the sfp_get_name() helper was moved around to better match the structure of the file. Russell, I've added a Suggested-by tag from you, as I used a description paragraph verbatim from your last review. - Patches 7 and 8 were reworked so that we don't report the phy id in the netlink command PHY_GET, as this is inconsistent between C22 and C45, and C45 wasn't even supported. All other patches are left unchanged from V15, besides a net-next rebase. As a remainder, here's what the PHY listings would look like : - eth0 has a 88x3310 acting as media converter, and an SFP module with an embedded 88e1111 PHY - eth2 has a 88e1510 PHY # ethtool --show-phys * PHY for eth0: PHY index: 1 Driver name: mv88x3310 PHY device name: f212a600.mdio-mii:00 Downstream SFP bus name: sfp-eth0 Upstream type: MAC PHY for eth0: PHY index: 2 Driver name: Marvell 88E1111 PHY device name: i2c:sfp-eth0:16 Upstream type: PHY Upstream PHY index: 1 Upstream SFP name: sfp-eth0 PHY for eth2: PHY index: 1 Driver name: Marvell 88E1510 PHY device name: f212a200.mdio-mii:00 Upstream type: MAC Ethtool patches : https://github.com/minimaxwell/ethtool/tree/mc/topo-v16 Link to V15: https://lore.kernel.org/netdev/20240703140806.271938-1-maxime.chevallier@bootlin.com/ (local) Link to V14: https://lore.kernel.org/netdev/20240701131801.1227740-1-maxime.chevallier@bootlin.com/ (local) Link to V13: https://lore.kernel.org/netdev/20240607071836.911403-1-maxime.chevallier@bootlin.com/ (local) Link to v12: https://lore.kernel.org/netdev/20240605124920.720690-1-maxime.chevallier@bootlin.com/ (local) Link to v11: https://lore.kernel.org/netdev/20240404093004.2552221-1-maxime.chevallier@bootlin.com/ (local) Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/ (local) Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/ (local) Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/ (local) Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/ (local) Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/ (local) Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/ (local) Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/ (local) Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/ (local) Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/ (local) Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/ (local) More discussions on specific issues that happened in 6.9-rc: https://lore.kernel.org/netdev/20240412104615.3779632-1-maxime.chevallier@bootlin.com/ (local) https://lore.kernel.org/netdev/20240429131008.439231-1-maxime.chevallier@bootlin.com/ (local) https://lore.kernel.org/netdev/20240507102822.2023826-1-maxime.chevallier@bootlin.com/ (local) Maxime Chevallier (14): net: phy: Introduce ethernet link topology representation net: sfp: pass the phy_device when disconnecting an sfp module's PHY net: phy: add helpers to handle sfp phy connect/disconnect net: sfp: Add helper to return the SFP bus name net: ethtool: Allow passing a phy index for some commands netlink: specs: add phy-index as a header parameter net: ethtool: Introduce a command to list PHYs on an interface netlink: specs: add ethnl PHY_GET command set net: ethtool: plca: Target the command to the requested PHY net: ethtool: pse-pd: Target the command to the requested PHY net: ethtool: cable-test: Target the command to the requested PHY net: ethtool: strset: Remove unnecessary check on genl_info net: ethtool: strset: Allow querying phy stats by index Documentation: networking: document phy_link_topology Documentation/netlink/specs/ethtool.yaml | 58 ++++ Documentation/networking/ethtool-netlink.rst | 51 +++ Documentation/networking/index.rst | 1 + .../networking/phy-link-topology.rst | 121 +++++++ MAINTAINERS | 1 + drivers/net/phy/Makefile | 2 +- drivers/net/phy/marvell-88x2222.c | 2 + drivers/net/phy/marvell.c | 2 + drivers/net/phy/marvell10g.c | 2 + drivers/net/phy/phy_device.c | 48 +++ drivers/net/phy/phy_link_topology.c | 105 ++++++ drivers/net/phy/phylink.c | 3 +- drivers/net/phy/qcom/at803x.c | 2 + drivers/net/phy/qcom/qca807x.c | 2 + drivers/net/phy/sfp-bus.c | 26 +- include/linux/netdevice.h | 4 +- include/linux/phy.h | 6 + include/linux/phy_link_topology.h | 82 +++++ include/linux/sfp.h | 8 +- include/uapi/linux/ethtool.h | 16 + include/uapi/linux/ethtool_netlink.h | 20 ++ net/core/dev.c | 15 + net/ethtool/Makefile | 3 +- net/ethtool/cabletest.c | 35 +- net/ethtool/netlink.c | 66 +++- net/ethtool/netlink.h | 33 ++ net/ethtool/phy.c | 308 ++++++++++++++++++ net/ethtool/plca.c | 30 +- net/ethtool/pse-pd.c | 30 +- net/ethtool/strset.c | 27 +- 30 files changed, 1057 insertions(+), 52 deletions(-) create mode 100644 Documentation/networking/phy-link-topology.rst create mode 100644 drivers/net/phy/phy_link_topology.c create mode 100644 include/linux/phy_link_topology.h create mode 100644 net/ethtool/phy.c -- 2.45.1