Hi, Jose

On Thu, 23 May 2024 at 14:45, Jose Ignacio Tornos Martinez
[off-list ref] wrote:

Hello Yongqin,

Again, not a lot of information from the logs, but perhaps you coud give me
more information for your scenario.

Could you try to execute the down interface operation, mac assignment and
the up interface operation from command line?
That works for me.

When I tried the down and up operations manually from the command line,
it worked.
But it only worked after I ran the down and up operations after the boot.
It fails to work by default after the boot for both the fresh deployment,
and for the later reboot

One thing I noticed is that the following message was printed twice
    "ax88179_178a 2-3:1.0 eth0: ax88179 - Link status is: 1"
after I ran the up operation,

Is that expected?

For details, please check the log here:
https://gist.github.com/liuyq/be8f5305d538067a344001f1d35f677b

Maybe some synchronization issue is happening in your boot operation.
Could you provide more information about how/when you are doing the
commented operations to try to reproduce?

The scripts are simple, here are the two scripts for Android build:
    https://android.googlesource.com/device/linaro/dragonboard/+/refs/heads/main/shared/utils/ethaddr/ethaddr.rc
    https://android.googlesource.com/device/linaro/dragonboard/+/refs/heads/main/shared/utils/ethaddr/set_ethaddr.sh

Is the one to run the down/change mac/up operations script.

Not sure why the up in the script does not work, but works when run manually.

--
Best Regards,
Yongqin Liu
---------------------------------------------------------------
#mailing list
linaro-android@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-android