[PATCH v7 net-next 14/14] net: phy: marvell-88q2xxx: move interrupt configuration
From: Dimitri Fedrau <hidden>
Date: 2024-02-18 07:58:41
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Move interrupt configuration from mv88q222x_revb0_config_init to mv88q2xxx_config_init. Same register and bits are used for the 88q2xxx devices. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Stefan Eichenberger <redacted> Signed-off-by: Dimitri Fedrau <redacted> --- drivers/net/phy/marvell-88q2xxx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 75740f378c66..6b4bd9883304 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c@@ -376,6 +376,14 @@ static int mv88q2xxx_config_init(struct phy_device *phydev) */ phydev->pma_extable = MDIO_PMA_EXTABLE_BT1; + /* Configure interrupt with default settings, output is driven low for + * active interrupt and high for inactive. + */ + if (phy_interrupt_is_valid(phydev)) + return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, + MDIO_MMD_PCS_MV_GPIO_INT_CTRL, + MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS); + return 0; }
@@ -701,14 +709,6 @@ static int mv88q222x_revb0_config_init(struct phy_device *phydev) return ret; } - /* Configure interrupt with default settings, output is driven low for - * active interrupt and high for inactive. - */ - if (phy_interrupt_is_valid(phydev)) - return phy_set_bits_mmd(phydev, MDIO_MMD_PCS, - MDIO_MMD_PCS_MV_GPIO_INT_CTRL, - MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS); - return mv88q2xxx_config_init(phydev); }
--
2.39.2