[PATCH V3 08/14 next] qca_spi: Improve calculation of RX buffer size
From: Stefan Wahren <wahrenst@gmx.net>
Date: 2024-01-24 22:33:16
Also in:
lkml
Subsystem:
networking drivers, qualcomm atheros qca7k ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Stefan Wahren, Linus Torvalds
There are two points with the calculation of RX buffer size which are not optimal: 1. dev->mtu is a mutual parameter and it's currently initialized with QCAFRM_MAX_MTU. But for RX buffer size calculation we always need the maximum possible MTU. So better use the define directly. 2. This magic number 4 represent the hardware generated frame length which is specific to SPI. We better replace this with the suitable define. There is no functional change. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> --- drivers/net/ethernet/qualcomm/qca_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 80182f8a4a50..6d2859aad921 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c@@ -813,8 +813,8 @@ qcaspi_netdev_init(struct net_device *dev) qca->clkspeed = qcaspi_clkspeed; qca->burst_len = qcaspi_burst_len; qca->spi_thread = NULL; - qca->buffer_size = (dev->mtu + VLAN_ETH_HLEN + QCAFRM_HEADER_LEN + - QCAFRM_FOOTER_LEN + 4) * QCASPI_RX_MAX_FRAMES; + qca->buffer_size = (QCAFRM_MAX_MTU + VLAN_ETH_HLEN + QCAFRM_HEADER_LEN + + QCAFRM_FOOTER_LEN + QCASPI_HW_PKT_LEN) * QCASPI_RX_MAX_FRAMES; memset(&qca->stats, 0, sizeof(struct qcaspi_stats)); --
2.34.1