Re: [PATCH net-next v9 15/15] p4tc: add P4 classifier

From
Jamal Hadi Salim <jhs@mojatatu.com>
Date
2023-12-11 15:44:04
Also in
bpf
Reply to
Daniel Borkmann, 2023-12-08
On Fri, Dec 8, 2023 at 5:06 AM Daniel Borkmann [off-list ref] wrote:
On 12/6/23 3:59 PM, Jamal Hadi Salim wrote:
quoted
On Tue, Dec 5, 2023 at 5:32 PM Daniel Borkmann [off-list ref] wrote:
quoted
On 12/5/23 5:23 PM, Jamal Hadi Salim wrote:
quoted
On Tue, Dec 5, 2023 at 8:43 AM Daniel Borkmann [off-list ref] wrote:
quoted
On 12/5/23 1:32 AM, John Fastabend wrote:
quoted
Jamal Hadi Salim wrote:
quoted
Introduce P4 tc classifier. A tc filter instantiated on this classifier
is used to bind a P4 pipeline to one or more netdev ports. To use P4
classifier you must specify a pipeline name that will be associated to
this filter, a s/w parser and datapath ebpf program. The pipeline must have
already been created via a template.
For example, if we were to add a filter to ingress of network interface
device $P0 and associate it to P4 pipeline simple_l3 we'd issue the
following command:
In addition to my comments from last iteration.
quoted
tc filter add dev $P0 parent ffff: protocol all prio 6 p4 pname simple_l3 \
       action bpf obj $PARSER.o section prog/tc-parser \
       action bpf obj $PROGNAME.o section prog/tc-ingress
Having multiple object files is a mistake IMO and will cost
performance. Have a single object file avoid stitching together
metadata and run to completion. And then run entirely from XDP
this is how we have been getting good performance numbers.
+1, fully agree.
As I stated earlier: while performance is important it is not the
highest priority for what we are doing, rather correctness is. We dont
want to be wrestling with the verifier or some other limitation like
tail call limits to gain some increase in a few kkps. We are taking a
gamble with the parser which is not using any kfuncs at the moment.
Putting them all in one program will increase the risk.
I don't think this is a good reason, this corners you into UAPI which
later on cannot be changed anymore. If you encounter such issues, then
why not bringing up actual concrete examples / limitations you run into
to the BPF community and help one way or another to get the verifier
improved instead? (Again, see sched_ext as one example improving verifier,
but also concrete example bug reports, etc could help.)
Which uapi are you talking about? The eBPF code gets generated by the
compiler. Whether we generate one or 10 programs or where we place
them is up to the compiler.
We choose today to generate the parser separately - but we can change
it in a heartbeat with zero kernel changes.
With UAPI I mean to even have this parser separation. Ideally, this should
just naturally be a single program as in XDP layer itself. You mentioned
below you could run the pipeline just in XDP..
Yes we can - but it doesnt break uapi. The simplest thing to do is to
place the pipeline either at TC or XDP fully.  Caveat being not
everything can run on XDP.

Probably showing XDP running the parser was not a good example - and i
think we should remove it from the commit messages to avoid confusion.
The intent there was to show that  XDP,  given its speed advantages,
can do the parsing faster and infact reject anything early if thats
what the P4 programm deemed it do; if it likes something then the tc
layer handles the rest of the pipeline processing. It is really p4
program dependent. Consider another example which is more sensible:
XDP has a fast path  (pipeline branching based on runtime conditions
works well in P4) and if there were exceptions to the fast path (maybe
a cache miss) then processing in the tc layer, etc.

I think we'll just remove such examples in the commit.

For the multi-prog-per level: If for a given P4 program the compiler
(v1) generates two separate ebpf programs(as we do in this case) and
then the next version of the compiler(v2) puts all the logic in one
ebpf program at XDP only - nothing breaks. i.e both V1 and V2 output
continue to work; maybe the V2 output could end up being more
efficient, etc.
quoted
quoted
quoted
As i responded to you earlier,  we just dont want to lose
functionality, some sample space:
- we could have multiple pipelines with different priorities - and
each pipeline may have its own logic with many tables etc (and the
choice to iterate the next one is essentially encoded in the tc action
codes)
- we want to be able to split the pipeline into parts that can run _in
unison_ in h/w, xdp, and tc
So parser at XDP, but then you push it up the stack (instead of staying
only at XDP layer) just to reach into tc layer to perform a corresponding
action.. and this just to work around verifier as you say?
You are mixing things. The idea of being able to split a pipeline into
hw:xdp:tc is a requirement.  You can run the pipeline fully in XDP  or
fully in tc or split it when it makes sense.
The idea of splitting the parser from the main p4 control block is for
two reasons 1) someone else can generate or handcode the parser if
they need to - we feel this is an area that may need to take advantage
of features like dynptr etc in the future 2) as a precaution to ensure
all P4 programs load. We have no problem putting both in one ebpf prog
when we gain confidence that it will _always_ work - it is a mere
change to what the compiler generates.
The cooperation between BPF progs at different layers (e.g. nfp allowed that
nicely from a BPF offload PoV) makes sense, just less to split the actions
within a given layer into multiple units where state needs to be transferred,
For the parser split, one motivation was: there are other tools that
are very specialized on parsers (see Tom) and as long as that tool can
read P4 and conform to our expectations, we should be able to use that
parser as a replacement. Maybe that example is too specific and doesnt
apply in the larger picture but like i said we can change it with a
compiler mod. No rush - we'll see where this goes.
packets reparsed, etc. When you say that "we have no problem putting both in
one ebpf prog when we gain confidence that it will _always_ work", then should
this not be the goal to start with? How do you quantify "gain confidence"?
Test/conformance suite? It would be better to start out with this in the first
place and fix or collaborate with whatever limits get encountered along the
way. This would be the case for XDP anyway given you mention you want to
support this layer.
It's just bad experience with the eBPF tooling that drove us in this
path (path explosions, pointer trickery, tail call limits, etc). Our
goal is to not require eBPF expertise for tc people (who are the main
consumers of this); things have to _just work_ after the compiler
emits them. We dont want to maintain a bag of tricks which may work
some of the time. For our audience a goal is to lower the barrier for
them and reduce dependence on "you must now be a guru at eBPF".
For now we are in a grace period with the compiler (even for the
parser separation, which we could end up removing) and over time
feedback for usability and optimization will keep improving generated
code and hopefully using new eBPF features more effectively. So i am
not very concerned about this.
quoted
quoted
quoted
- we use tc block to map groups of ports heavily
- we use netlink as our control API
quoted
quoted
quoted
$PROGNAME.o and $PARSER.o is a compilation of the eBPF programs generated
by the P4 compiler and will be the representation of the P4 program.
Note that filter understands that $PARSER.o is a parser to be loaded
at the tc level. The datapath program is merely an eBPF action.

Note we do support a distinct way of loading the parser as opposed to
making it be an action, the above example would be:

tc filter add dev $P0 parent ffff: protocol all prio 6 p4 pname simple_l3 \
       prog type tc obj $PARSER.o ... \
       action bpf obj $PROGNAME.o section prog/tc-ingress

We support two types of loadings of these initial programs in the pipeline
and differentiate between what gets loaded at tc vs xdp by using syntax of

either "prog type tc obj" or "prog type xdp obj"

For XDP:

tc filter add dev $P0 ingress protocol all prio 1 p4 pname simple_l3 \
       prog type xdp obj $PARSER.o section parser/xdp \
       pinned_link /sys/fs/bpf/mylink \
       action bpf obj $PROGNAME.o section prog/tc-ingress
I don't think tc should be loading xdp programs. XDP is not 'tc'.
For XDP, we do have a separate attach API, for BPF links we have bpf_xdp_link_attach()
via bpf(2) and regular progs we have the classic way via dev_change_xdp_fd() with
IFLA_XDP_* attributes. Mid-term we'll also add bpf_mprog support for XDP to allow
multi-user attachment. tc kernel code should not add yet another way of attaching XDP,
this should just reuse existing uapi infra instead from userspace control plane side.
I am probably missing something. We are not loading the XDP program -
it is preloaded, the only thing the filter does above is grabbing a
reference to it. The P4 pipeline in this case is split into a piece
(the parser) that runs on XDP and some that runs on tc. And as i
mentioned earlier we could go further another piece which is part of
the pipeline may run in hw. And infact in the future a compiler will
be able to generate code that is split across machines. For our s/w
datapath on the same node the only split is between tc and XDP.
So it is even worse from a design PoV.
So from a wild accusation that we are loading the program to now a
condescending remark we have a bad design.
It's my opinion, yes, because all the pieces don't really fit naturally
together. It's all centered around the netlink layer which you call out
as 'non-negotiable', whereas this would have a better fit for a s/w-based
solution where you provide a framework for developers from user space.
Why do you even need an XDP reference in tc layer? Even though the XDP
loading happens through the regular path anyway.. just to knit the
different pieces artificially together despite the different existing
layers & APIs.
The P4 abstraction is a pipeline - to give analogy with current tc
offloads (such as flower): the pipeline placement could be split
between h/w and s/w (or be entirely in one or other),
So the placement idea is already cooked in the TC psyche. And the
control to all that happens at the tc layer. I can send a netlink
message and it will tell me which part is in h/w and s/w. We are just
following a similar thought process here: The pipeline is owned by TC
and therefore its management and control (and source of truth) sits at
TC. True, XDP is a different layer - but from an engineering
perspective, I dont see this as this layer violation rather it is
something pragmatic to do.
What should actually sit in user space and orchestrate
the different generic pieces of the kernel toolbox together, you now try
to artificially move one one layer down in a /non-generic/ way. Given this
is trying to target a s/w datapath, I just don't follow why the building
blocks of this work cannot be done in a /generic/ way. Meaning, generic
extensions to the kernel infra in a p4-agnostic way, so they are also
useful and consumable outside of it for tc BPF or XDP users, and then in
user space the control plane picks all the necessary pieces it needs. (Think
of an analogy to containers today.. there is no such notion in the kernel
and the user space infra picks all the necessary pieces such as netns,
cgroups, etc to flexibly assemble this higher level concept.)
If there are alternative ways to load the programs and define their
dependency that would work with tc, then it should be sufficient to
just feed the fds to the p4 classifier when we instantiate a p4
pipeline (or may not even be needed depending on what that stiching
infra is). I did look at tcx hard after my last response and i am
afraid, Daniel, that you divorced us and our status right now is we
are your "ex" ;-> (is that what x means in tcx?). But if such a scheme
exists, the eBPF progs can still call the exposed kfuncs meaning it
will continue to work in the TC realm...
quoted
quoted
The kernel side allows XDP program
to be passed to cls_p4, but then it's not doing anything but holding a
reference to that BPF program. Iow, you need anyway to go the regular way
of bpf_xdp_link_attach() or dev_change_xdp_fd() to install XDP. Why is the
reference even needed here, why it cannot be done in user space from your
control plane? This again, feels like a shim layer which should live in
user space instead.
Our control path goes through tc - where we instantiate the pipeline
on typically a tc block. Note: there could be many pipeline instances
of the same set of ebpf programs. We need to know which ebpf programs
are bound to which pipelines. When a pipeline is instantiated or
destroyed it sends (netlink) events to user space. It is only natural
to reference the programs which are part of the pipeline at that point
i.e loading for tc progs and referencing for xdp. The control is
already in user space to create bpf links etc.

Our concern was (if you looked at the RFC discussions earlier on) a)
we dont want anyone removing or replacing the XDP program that is part
of a P4 pipeline b) we wanted to ensure in the case of a split
pipeline that the XDP code that ran before tc part of the pipeline was
infact the one that we wanted to run. The original code (before Toke
made a suggestion to use bpf links) was passing a cookie from XDP to
tc which we would use to solve these concerns. By creating the link in
user space we can pass the fd - which is what you are seeing here.
That solves both #a and #b.
Granted we may be a little paranoid but operationally an important
detail is:  if one dumps the tc filter with this approach they know
what progs compose the pipeline.
But just holding the reference in the tc cls_p4 code on the XDP program
doesn't automatically mean that this blocks anything else from happening.
You still need a user space control plane which creates the link, maybe
pins it somewhere, and when you need to update the program at the XDP
layer, then that user space control plane updates the prog @ XDP link. At
that point the dump in tc has a window of inconsistency given this is
non-atomic, and given this two-step approach.. what happens when the
control plane crashesin the middle in the worst case, then would you
take the XDP link info as source of truth or the cls_p4 dump? Just
operating on the XDP link without this two-step detour is a much more
robust approach given you avoid this race altogether.
See my comment above on tcx on splitting the loading from tc runtime.
My experience in SDN is that you want the kernel to be the source of
truth. i.e.  if i want to know which progs are running for a given p4
pipeline, at what level, putting this info on some user space daemon
which - as you point out may crush - is not the most robust. I should
be able to just use a cli to find out the truth.
I didnt quiet follow your comment above on the XDP prog being replaced
which a dump is going on... Am i mistaken in thinking that as long as
i hold the refcount, you cant just swap things out from underneath me?
quoted
quoted
quoted
quoted
quoted
quoted
The theory of operations is as follows:

================================1. PARSING================================

The packet first encounters the parser.
The parser is implemented in ebpf residing either at the TC or XDP
level. The parsed header values are stored in a shared eBPF map.
When the parser runs at XDP level, we load it into XDP using tc filter
command and pin it to a file.

=============================2. ACTIONS=============================

In the above example, the P4 program (minus the parser) is encoded in an
action($PROGNAME.o). It should be noted that classical tc actions
continue to work:
IOW, someone could decide to add a mirred action to mirror all packets
after or before the ebpf action.

tc filter add dev $P0 parent ffff: protocol all prio 6 p4 pname simple_l3 \
       prog type tc obj $PARSER.o section parser/tc-ingress \
       action bpf obj $PROGNAME.o section prog/tc-ingress \
       action mirred egress mirror index 1 dev $P1 \
       action bpf obj $ANOTHERPROG.o section mysect/section-1

It should also be noted that it is feasible to split some of the ingress
datapath into XDP first and more into TC later (as was shown above for
example where the parser runs at XDP level). YMMV.
Is there any performance value in partial XDP and partial TC? The main
wins we see in XDP are when we can drop, redirect, etc the packet
entirely in XDP and avoid skb altogether.
quoted
Co-developed-by: Victor Nogueira <redacted>
Signed-off-by: Victor Nogueira <redacted>
Co-developed-by: Pedro Tammela <redacted>
Signed-off-by: Pedro Tammela <redacted>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
The cls_p4 is roughly a copy of {cls,act}_bpf, and from a BPF community side
we moved away from this some time ago for the benefit of a better management
API for tc BPF programs via bpf(2) through bpf_mprog (see libbpf and BPF selftests
around this), as mentioned earlier. Please use this instead for your userspace
control plane, otherwise we are repeating the same mistakes from the past again
that were already fixed.
Sorry, that is your use case for kubernetes and not ours. We want to
There is nothing specific to k8s, it's generic infrastructure for tc BPF
and also used outside of k8s scope; please double-check the selftests to
get a picture of the API and libbpf integration.
I did and i couldnt see how we can do any of the tcx/mprog using tc to
meet our requirements. I may be missing something very obvious but it
was why i said it was for your use case not ours. I would be willing
to look again if you say it works with tc but do note that I am fine
with tc infra where i can add actions, all composed of different
programs if i wanted to; and add addendums to use other tc existing
(non-ebpf) actions if i needed to. We have what we need working fine,
so there has to be a compelling reason to change.
I asked you a question earlier whether in your view tc use of ebpf is
deprecated. I have seen you make a claim in the past that sched_act
was useless and that everyone needs to use sched_cls and you went on
to say nobody needs priorities. TBH, that is _your view for your use
case_.
I do see act_bpf as redundant given the cls_bpf with the direct
action mode can do everything that is needed with BPF, and whenever
something was needed, extensions to verifier/helpers/kfuncs/etc were
sufficient. We've been using this for years this way in production
with complex programs and never saw a need to utilize any of the
remaining actions outside of BPF or to have a split of parser/action
as mentioned above.
When you have a very specific use case you can fix things as needed as
you described a lot easier;  we have a large permutation of potential
progs and pipeline flows to be dictated by P4 progs. We want to make
sure things work all the time without someone calling us to say "how
come this doesnt load?". For that we are willing to sacrifice some
performance and i am sure we'll get better over time. So if it is
multi-action so be it, at least for now. Definitely, we would not have
wanted to go the eBPF path without kfuncs (and XDP plays a nice role)
- so i feel we are in a good place.
My thinking process has been converted from prioritizing "let me
squeeze those cycles by skipping a memset" to "lets make this thing
usable by other people" and if  i loose a few kpps because i have two
actions instead of one, no big deal - we'll get better over time.
The additional machinery would also add overhead
in s/w fast path which can be avoided (if it were e.g. cls_matchall +
act_bpf). That said, people use cls_bpf in multi-user mode where
different progs get attached. The priorities was collective BPF
community feedback that these are hard to use due to the seen
collisions in practice which led to various hard to debug incidents.
While this was not my view initially, I agree that the new design
with before/after and relative prog/link reference is a better ux.
I empathize with the situation you faced (i note that motivation was a
multi user food fight). We dont have that "collision" problem in our
use cases. TBH, TC priorities and chains (which i can jump to) are
sufficient for what we do. Note: I am also not objecting to getting
better performance  (which i am sure we'll get better over time) or
finding a common ground for how to specify the collection of programs
(as long as it serves our needs as well i.e tc, netlink).

cheers,
jamal

quoted
quoted
quoted
use the tc infra. We want to use netlink. I could be misreading what
you are saying but it seems that you are suggesting that tc infra is
now obsolete as far as ebpf is concerned? Overall: It is a bit selfish
to say your use case dictates how other people use ebpf. ebpf is just
a means to an end for us and _is not the end goal_ - just an infra
toolset.
Not really, the infrastructure is already there and ready to be used and
it supports basic building blocks such as BPF links, relative prog/link
dependency resolution, etc, where none of it can be found here. The
problem is "we want to use netlink" which is even why you need to push
down things like XDP prog, but it's broken by design, really. You are
trying to push down a control plane into netlink which should have been
a framework in user space.
The netlink part is not negotiable - the cover letter says why and i
have explained it 10K times in these threads. You are listing all
these tcx features like relativeness for which i have no use for.
OTOH, like i said if it works with tc then i would be willing to look
at it but there need to be compelling reasons to move to that shiny
new infra.
If you don't have a particular case for multi-prog, that is totally
fine. You mentioned earlier on "we dont want anyone removing or replacing
the XDP program that is part of a P4 pipeline", and that you are using
BPF links to solve it, so I presume it would be equally important case
for the tc BPF program of your P4 pipeline. I presume you use libbpf, so
here the controller would do exact similar steps on tcx that you do for
XDP to set up BPF links. But again, my overall comment comes down to
why it cannot be broken into generic extensions as mentioned above given
XDP/tc infra is in place.
Thanks,
Daniel
Thread (30 messages) 30 messages, 6 authors, last reply 2023-12-11
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help