[PATCH v4 4/6] net: phy: at803x: add the function phydev_id_is_qca808x
flat view
STALE1062d
SUPERSEDED
From: Luo Jie <hidden>
Date: 2023-11-16 12:10:47
Also in:
linux-devicetree, linux-doc, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v4 of 6 in this series.
Revisions (6)
The function phydev_id_is_qca808x is applicable to the PHY qca8081 and qca8084. Signed-off-by: Luo Jie <redacted> --- drivers/net/phy/at803x.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 471d5c13d76d..f56202f5944d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -1165,6 +1165,12 @@ static void at803x_link_change_notify(struct phy_device *phydev) } } +static inline bool phydev_id_is_qca808x(struct phy_device *phydev) +{ + return phydev_id_compare(phydev, QCA8081_PHY_ID) || + phydev_id_compare(phydev, QCA8084_PHY_ID); +} + static int at803x_read_specific_status(struct phy_device *phydev) { int ss;
@@ -1184,8 +1190,8 @@ static int at803x_read_specific_status(struct phy_device *phydev) if (sfc < 0) return sfc; - /* qca8081 takes the different bits for speed value from at803x */ - if (phydev->drv->phy_id == QCA8081_PHY_ID) + /* qca808x takes the different bits for speed value from at803x */ + if (phydev_id_is_qca808x(phydev)) speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss); else speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
@@ -1316,7 +1322,7 @@ static int at803x_config_aneg(struct phy_device *phydev) */ ret = 0; - if (phydev->drv->phy_id == QCA8081_PHY_ID) { + if (phydev_id_is_qca808x(phydev)) { int phy_ctrl = 0; /* The reg MII_BMCR also needs to be configured for force mode, the
@@ -1470,8 +1476,8 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair) { u16 cdt; - /* qca8081 takes the different bit 15 to enable CDT test */ - if (phydev->drv->phy_id == QCA8081_PHY_ID) + /* qca808x takes the different bit 15 to enable CDT test */ + if (phydev_id_is_qca808x(phydev)) cdt = QCA808X_CDT_ENABLE_TEST | QCA808X_CDT_LENGTH_UNIT | QCA808X_CDT_INTER_CHECK_DIS;
@@ -1487,7 +1493,7 @@ static int at803x_cdt_wait_for_completion(struct phy_device *phydev) int val, ret; u16 cdt_en; - if (phydev->drv->phy_id == QCA8081_PHY_ID) + if (phydev_id_is_qca808x(phydev)) cdt_en = QCA808X_CDT_ENABLE_TEST; else cdt_en = AT803X_CDT_ENABLE_TEST;
--
2.42.0