On Mon, 13 Nov 2023 21:12:19 +0000, Daniel Golle wrote:

Add various clock controllers found in the MT7988 SoC to existing
bindings (if applicable) and add files for the new ethwarp, mcusys
and xfi-pll clock controllers not previously present in any previous
MediaTek SoC.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 .../bindings/arm/mediatek/mediatek,ethsys.txt |  1 +
 .../arm/mediatek/mediatek,infracfg.yaml       |  1 +
 .../arm/mediatek/mediatek,mt7988-ethwarp.yaml | 60 +++++++++++++++++++
 .../arm/mediatek/mediatek,mt7988-mcusys.yaml  | 46 ++++++++++++++
 .../arm/mediatek/mediatek,mt7988-xfi-pll.yaml | 49 +++++++++++++++
 .../bindings/clock/mediatek,apmixedsys.yaml   |  1 +
 .../bindings/clock/mediatek,topckgen.yaml     |  1 +
 .../bindings/net/pcs/mediatek,sgmiisys.yaml   |  2 +
 8 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7988-ethwarp.yaml
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7988-mcusys.yaml
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7988-xfi-pll.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7988-ethwarp.example.dtb: /example-0/soc/clock-controller@15031000/reset-controller: failed to match any schema with compatible: ['ti,syscon-reset']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/42c9447ae32be8aaeca2047a5e97660fb67dd286.1699909748.git.daniel@makrotopia.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.