[PATCH net 5/5] net: hns3: add 5ms delay before clear firmware reset irq source
From: Jijie Shao <shaojijie@huawei.com>
Date: 2023-09-15 09:59:54
Also in:
lkml
Subsystem:
hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Jie Wang <redacted> Currently the reset process in hns3 and firmware watchdog init process is asynchronous. we think firmware watchdog initialization is completed before hns3 clear the firmware interrupt source. However, firmware initialization may not complete early. so we add delay before hns3 clear firmware interrupt source and 5 ms delay is enough to avoid second firmware reset interrupt. Signed-off-by: Jie Wang <redacted> Signed-off-by: Jijie Shao <shaojijie@huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 2bd77871f3bf..c42574e29747 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c@@ -3564,9 +3564,14 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval) static void hclge_clear_event_cause(struct hclge_dev *hdev, u32 event_type, u32 regclr) { +#define HCLGE_IMP_RESET_DELAY 5 + switch (event_type) { case HCLGE_VECTOR0_EVENT_PTP: case HCLGE_VECTOR0_EVENT_RST: + if (regclr == BIT(HCLGE_VECTOR0_IMPRESET_INT_B)) + mdelay(HCLGE_IMP_RESET_DELAY); + hclge_write_dev(&hdev->hw, HCLGE_MISC_RESET_STS_REG, regclr); break; case HCLGE_VECTOR0_EVENT_MBX:
--
2.30.0