[PATCH] net: phy: dp83867: Add support for hardware blinking LEDs
flat view
STALE1121d
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2023-09-07 16:24:20
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This implements the led_hw_* hooks to support hardware blinking LEDs on the DP83867 phy. The driver supports all LED modes that have a corresponding TRIGGER_NETDEV_* define. Error and collision do not have a TRIGGER_NETDEV_* define, so these modes are currently not supported. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/net/phy/dp83867.c | 137 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index e397e7d642d92..5f08f9d38bd7a 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c@@ -159,6 +159,23 @@ #define DP83867_LED_DRV_EN(x) BIT((x) * 4) #define DP83867_LED_DRV_VAL(x) BIT((x) * 4 + 1) +#define DP83867_LED_FN(idx, val) (((val) & 0xf) << ((idx) * 4)) +#define DP83867_LED_FN_MASK(idx) (0xf << ((idx) * 4)) +#define DP83867_LED_FN_RX_ERR 0xe /* Receive Error */ +#define DP83867_LED_FN_RX_TX_ERR 0xd /* Receive Error or Transmit Error */ +#define DP83867_LED_FN_LINK_RX_TX 0xb /* Link established, blink for rx or tx activity */ +#define DP83867_LED_FN_FULL_DUPLEX 0xa /* Full duplex */ +#define DP83867_LED_FN_LINK_100_1000_BT 0x9 /* 100/1000BT link established */ +#define DP83867_LED_FN_LINK_10_100_BT 0x8 /* 10/100BT link established */ +#define DP83867_LED_FN_LINK_10_BT 0x7 /* 10BT link established */ +#define DP83867_LED_FN_LINK_100_BTX 0x6 /* 100 BTX link established */ +#define DP83867_LED_FN_LINK_1000_BT 0x5 /* 1000 BT link established */ +#define DP83867_LED_FN_COLLISION 0x4 /* Collision detected */ +#define DP83867_LED_FN_RX 0x3 /* Receive activity */ +#define DP83867_LED_FN_TX 0x2 /* Transmit activity */ +#define DP83867_LED_FN_RX_TX 0x1 /* Receive or Transmit activity */ +#define DP83867_LED_FN_LINK 0x0 /* Link established */ + enum { DP83867_PORT_MIRROING_KEEP, DP83867_PORT_MIRROING_EN,
@@ -1018,6 +1035,123 @@ dp83867_led_brightness_set(struct phy_device *phydev, val); } +static int dp83867_led_mode(u8 index, unsigned long rules) +{ + if (index >= DP83867_LED_COUNT) + return -EINVAL; + + switch (rules) { + case BIT(TRIGGER_NETDEV_LINK): + return DP83867_LED_FN_LINK; + case BIT(TRIGGER_NETDEV_LINK_10): + return DP83867_LED_FN_LINK_10_BT; + case BIT(TRIGGER_NETDEV_LINK_100): + return DP83867_LED_FN_LINK_100_BTX; + case BIT(TRIGGER_NETDEV_FULL_DUPLEX): + return DP83867_LED_FN_FULL_DUPLEX; + case BIT(TRIGGER_NETDEV_TX): + return DP83867_LED_FN_TX; + case BIT(TRIGGER_NETDEV_RX): + return DP83867_LED_FN_RX; + case BIT(TRIGGER_NETDEV_LINK_1000): + return DP83867_LED_FN_LINK_1000_BT; + case BIT(TRIGGER_NETDEV_TX) | BIT(TRIGGER_NETDEV_RX): + return DP83867_LED_FN_RX_TX; + case BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK_1000): + return DP83867_LED_FN_LINK_100_1000_BT; + case BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_100): + return DP83867_LED_FN_LINK_10_100_BT; + case BIT(TRIGGER_NETDEV_LINK) | BIT(TRIGGER_NETDEV_TX) | BIT(TRIGGER_NETDEV_RX): + return DP83867_LED_FN_LINK_RX_TX; + default: + return -EOPNOTSUPP; + } +} + +static int dp83867_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + int ret; + + ret = dp83867_led_mode(index, rules); + if (ret < 0) + return ret; + + return 0; +} + +static int dp83867_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + int mode, ret; + + mode = dp83867_led_mode(index, rules); + if (mode < 0) + return mode; + + ret = phy_modify(phydev, DP83867_LEDCR1, DP83867_LED_FN_MASK(index), + DP83867_LED_FN(index, mode)); + if (ret) + return ret; + + return phy_modify(phydev, DP83867_LEDCR2, DP83867_LED_DRV_EN(index), 0); +} + +static int dp83867_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + int val; + + val = phy_read(phydev, DP83867_LEDCR1); + if (val < 0) + return val; + + val &= DP83867_LED_FN_MASK(index); + val >>= index * 4; + + switch (val) { + case DP83867_LED_FN_LINK: + *rules = BIT(TRIGGER_NETDEV_LINK); + break; + case DP83867_LED_FN_LINK_10_BT: + *rules = BIT(TRIGGER_NETDEV_LINK_10); + break; + case DP83867_LED_FN_LINK_100_BTX: + *rules = BIT(TRIGGER_NETDEV_LINK_100); + break; + case DP83867_LED_FN_FULL_DUPLEX: + *rules = BIT(TRIGGER_NETDEV_FULL_DUPLEX); + break; + case DP83867_LED_FN_TX: + *rules = BIT(TRIGGER_NETDEV_TX); + break; + case DP83867_LED_FN_RX: + *rules = BIT(TRIGGER_NETDEV_RX); + break; + case DP83867_LED_FN_LINK_1000_BT: + *rules = BIT(TRIGGER_NETDEV_LINK_1000); + break; + case DP83867_LED_FN_RX_TX: + *rules = BIT(TRIGGER_NETDEV_TX) | BIT(TRIGGER_NETDEV_RX); + break; + case DP83867_LED_FN_LINK_100_1000_BT: + *rules = BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK_1000); + break; + case DP83867_LED_FN_LINK_10_100_BT: + *rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_100); + break; + case DP83867_LED_FN_LINK_RX_TX: + *rules = BIT(TRIGGER_NETDEV_LINK) | BIT(TRIGGER_NETDEV_TX) | + BIT(TRIGGER_NETDEV_RX); + break; + default: + *rules = 0; + break; + } + + return 0; +} + static struct phy_driver dp83867_driver[] = { { .phy_id = DP83867_PHY_ID,
@@ -1047,6 +1181,9 @@ static struct phy_driver dp83867_driver[] = { .set_loopback = dp83867_loopback, .led_brightness_set = dp83867_led_brightness_set, + .led_hw_is_supported = dp83867_led_hw_is_supported, + .led_hw_control_set = dp83867_led_hw_control_set, + .led_hw_control_get = dp83867_led_hw_control_get, }, }; module_phy_driver(dp83867_driver);
--
2.39.2