This schema is largely a copy of the genetlink-legacy schema with the
following additions:

 - a top-level protonum property, e.g. 0 (for NETLINK_ROUTE)
 - add netlink-raw to the list of protocols supported by the schema
 - add a value property to mcast-group definitions

This schema is very similar to genetlink-legacy and I considered
making the changes there and symlinking to it. On balance I felt that
might be problematic for accurate schema validation.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
 Documentation/netlink/netlink-raw.yaml | 414 +++++++++++++++++++++++++
 1 file changed, 414 insertions(+)
 create mode 100644 Documentation/netlink/netlink-raw.yaml

diff --git a/Documentation/netlink/netlink-raw.yaml b/Documentation/netlink/netlink-raw.yaml
new file mode 100644
index 000000000000..a5ec6f3e41cc
--- /dev/null
+++ b/Documentation/netlink/netlink-raw.yaml

@@ -0,0 +1,414 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+%YAML 1.2
+---
+$id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#
+$schema: https://json-schema.org/draft-07/schema
+
+# Common defines
+$defs:
+  uint:
+    type: integer
+    minimum: 0
+  len-or-define:
+    type: [ string, integer ]
+    pattern: ^[0-9A-Za-z_]+( - 1)?$
+    minimum: 0
+
+# Schema for specs
+title: Protocol
+description: Specification of a genetlink protocol
+type: object
+required: [ name, doc, attribute-sets, operations ]
+additionalProperties: False
+properties:
+  name:
+    description: Name of the genetlink family.
+    type: string
+  doc:
+    type: string
+  version:
+    description: Generic Netlink family version. Default is 1.
+    type: integer
+    minimum: 1
+  protocol:
+    description: Schema compatibility level. Default is "genetlink".
+    enum: [ genetlink, genetlink-c, genetlink-legacy, netlink-raw ] # Trim
+  # Start netlink-raw
+  protonum:
+    description: Protocol number to use for netlink-raw
+    type: integer
+  # End netlink-raw
+  uapi-header:
+    description: Path to the uAPI header, default is linux/${family-name}.h
+    type: string
+  # Start genetlink-c
+  c-family-name:
+    description: Name of the define for the family name.
+    type: string
+  c-version-name:
+    description: Name of the define for the verion of the family.