Hi Lukasz,

On Wed, Aug 30, 2023 at 06:38:18PM +0200, Lukasz Majewski wrote:

Hi Oleksij,

The implementation as you suggested seems to work :-)

The ksz_get_phy_flags() - where the MICREL_NO_EEE is set is executed
before ksz9477_config_init().

And then the eee_broken_modes are taken into account.

# ethtool --show-eee lan1
EEE Settings for lan1:
        EEE status: disabled
        Tx LPI: 0 (us)
        Supported EEE link modes:  100baseT/Full 
                                   1000baseT/Full 
        Advertised EEE link modes:  Not reported
        Link partner advertised EEE link modes:  Not reported

I will prepare tomorrow a proper patch.

can you please by the way remove this line:
https://elixir.bootlin.com/linux/v6.5/source/drivers/net/phy/micrel.c#L1803

it is obsolet by eee_broken_modes.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |