Re: [PATCH v1 0/2] Add ethernet nodes for StarFive JH7110 SoC
flat view
From: Guo Samin <hidden>
Date: 2023-07-21 02:09:38
Also in:
linux-devicetree, linux-riscv, lkml
-------- 原始信息 -------- 主题: Re: [PATCH v1 0/2] Add ethernet nodes for StarFive JH7110 SoC From: Conor Dooley <conor@kernel.org> 收件人: Conor Dooley [off-list ref], Rob Herring [off-list ref], Krzysztof Kozlowski [off-list ref], Paul Walmsley [off-list ref], Palmer Dabbelt [off-list ref], Albert Ou [off-list ref], Hal Feng [off-list ref], linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, netdev@vger.kernel.org, Samin Guo [off-list ref] 日期: 2023/7/21
From: Conor Dooley <conor.dooley@microchip.com> On Fri, 14 Jul 2023 18:45:19 +0800, Samin Guo wrote:quoted
This series adds ethernet nodes for StarFive JH7110 RISC-V SoC, and has been tested on StarFive VisionFive-2 v1.2A and v1.3B SBC boards. The first patch adds ethernet nodes for jh7110 SoC, the second patch adds ethernet nodes for visionfive 2 SBCs. This series relies on xingyu's syscon patch[1]. For more information and support, you can visit RVspace wiki[2]. [...]Applied to riscv-dt-for-next, thanks! [1/2] riscv: dts: starfive: jh7110: Add ethernet device nodes https://git.kernel.org/conor/c/1ff166c97972 [2/2] riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy https://git.kernel.org/conor/c/b15a73c358d1 Thanks, Conor.
Hi Conor， Thank you so much！ There is a question about the configuration of phy that I would like to consult you. Latest on motorcomm PHY V5[1]: Follow Rob Herring's advice motorcomm,rx-xxx-driver-strength Changed to motorcomm,rx-xxx-drv-microamp . V5 has already received a reviewed-by from Andrew Lunn, and it should not change again. Should I submit another pacthes based on riscv-dt-for-next? [1] https://patchwork.kernel.org/project/netdevbpf/cover/20230720111509.21843-1-samin.guo@starfivetech.com Best regards, Samin