Re: [PATCH 4/6] clk: qcom: Add NSS clock Controller driver for IPQ9574
From: Simon Horman <hidden>
Date: 2023-07-13 05:38:08
Also in:
linux-arm-kernel, linux-arm-msm, linux-clk, linux-devicetree, lkml
On Tue, Jul 11, 2023 at 03:05:27PM +0530, Devi Priya wrote:
Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 based devices. Signed-off-by: Devi Priya <redacted>
...
+static const struct qcom_reset_map nss_cc_ipq9574_resets[] = {
+ [NSS_CC_CE_BCR] = { 0x28400, 0 },
+ [NSS_CC_CLC_BCR] = { 0x28600, 0 },
+ [NSS_CC_EIP197_BCR] = { 0x16004, 0 },
+ [NSS_CC_HAQ_BCR] = { 0x28300, 0 },
+ [NSS_CC_IMEM_BCR] = { 0xe004, 0 },
+ [NSS_CC_MAC_BCR] = { 0x28100, 0 },
+ [NSS_CC_PPE_BCR] = { 0x28200, 0 },
+ [NSS_CC_UBI_BCR] = { 0x28700, 0 },
+ [NSS_CC_UNIPHY_BCR] = { 0x28900, 0 },
+ [UBI3_CLKRST_CLAMP_ENABLE] = { 0x28A04, 9 },
+ [UBI3_CORE_CLAMP_ENABLE] = { 0x28A04, 8 },
+ [UBI2_CLKRST_CLAMP_ENABLE] = { 0x28A04, 7 },
+ [UBI2_CORE_CLAMP_ENABLE] = { 0x28A04, 6 },
+ [UBI1_CLKRST_CLAMP_ENABLE] = { 0x28A04, 5 },
+ [UBI1_CORE_CLAMP_ENABLE] = { 0x28A04, 4 },
+ [UBI0_CLKRST_CLAMP_ENABLE] = { 0x28A04, 3 },
+ [UBI0_CORE_CLAMP_ENABLE] = { 0x28A04, 2 },
+ [NSSNOC_NSS_CSR_ARES] = { 0x28A04, 1 },
+ [NSS_CSR_ARES] { 0x28A04, 0 },Hi Devi, There appears to be an '=' missing in the line above. ...