Re: [PATCH 07/10] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Date: 2023-07-06 09:26:32
Also in:
alsa-devel, dmaengine, linux-arm-kernel, linux-crypto, linux-devicetree, linux-i2c, linux-iio, linux-media, linux-mmc, linux-phy, linux-serial, linux-spi, linux-usb, lkml
Hi Gatien On 7/5/23 19:27, Gatien Chevallier wrote:
quoted hunk ↗ jump to hunk
RIFSC is a firewall controller. Change its compatible so that is matches the documentation and reference RIFSC as a feature-domain-controller. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> --- arch/arm64/boot/dts/st/stm32mp251.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 5268a4321841..62101084cab8 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi@@ -106,17 +106,20 @@ soc@0 { ranges = <0x0 0x0 0x0 0x80000000>; rifsc: rifsc-bus@42080000 { - compatible = "simple-bus"; + compatible = "st,stm32mp25-rifsc";
You could keep "simple-bus" compatible (in second position). In case of the RIFSC is not probed, the platform will be able to boot. If you agree you can use the same for ETZPC. Cheers Alex
reg = <0x42080000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ feature-domain-controller;
+ #feature-domain-cells = <1>;
usart2: serial@400e0000 {
compatible = "st,stm32h7-uart";
reg = <0x400e0000 0x400>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ck_flexgen_08>;
+ feature-domains = <&rifsc 32>;
status = "disabled";
};
};