[PATCH v2 22/23] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
From: Bartosz Golaszewski <hidden>
Date: 2023-06-15 12:16:23
Also in:
linux-arm-kernel, linux-arm-msm, linux-devicetree, linux-phy, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
From: Bartosz Golaszewski <redacted> Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <redacted> Reviewed-by: Konrad Dybcio <redacted> --- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9f39ab59c283..bf90f825ff67 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts@@ -371,6 +371,22 @@ &spi16 { }; &tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + qup_uart10_default: qup-uart10-state { pins = "gpio46", "gpio47"; function = "qup1_se3";
--
2.39.2