Re: [PATCH v5 2/8] iio: mb1232: relax return value check for IRQ get
From: <hidden>
Date: 2023-05-21 18:32:36
Also in:
linux-acpi, linux-gpio, linux-i2c, linux-iio, linux-mips, lkml
Fri, May 19, 2023 at 02:01:23PM +0300, Matti Vaittinen kirjoitti:
fwnode_irq_get() was changed to not return 0 anymore. Drop check for return value 0. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
With or without below being addressed, Reviewed-by: Andy Shevchenko <redacted>
quoted hunk ↗ jump to hunk
--- Revsion history: v4 => v5: - drop unnecessary data->irqnr = -1 assignment The first patch of the series changes the fwnode_irq_get() so this depends on the first patch of the series and should not be applied alone. --- drivers/iio/proximity/mb1232.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)diff --git a/drivers/iio/proximity/mb1232.c b/drivers/iio/proximity/mb1232.c index e70cac8240af..3ae226297a00 100644 --- a/drivers/iio/proximity/mb1232.c +++ b/drivers/iio/proximity/mb1232.c@@ -76,7 +76,7 @@ static s16 mb1232_read_distance(struct mb1232_data *data) goto error_unlock; } - if (data->irqnr >= 0) { + if (data->irqnr > 0) { /* it cannot take more than 100 ms */ ret = wait_for_completion_killable_timeout(&data->ranging, HZ/10);@@ -212,10 +212,7 @@ static int mb1232_probe(struct i2c_client *client) init_completion(&data->ranging); data->irqnr = fwnode_irq_get(dev_fwnode(&client->dev), 0); - if (data->irqnr <= 0) { - /* usage of interrupt is optional */
Maybe this comment can be kept.
- data->irqnr = -1;
- } else {
+ if (data->irqnr > 0) {
ret = devm_request_irq(dev, data->irqnr, mb1232_handle_irq,
IRQF_TRIGGER_FALLING, id->name, indio_dev);
if (ret < 0) {-- With Best Regards, Andy Shevchenko