[PATCH 3/3] arm64: dts: allwinner: h6: tanix-tx6: Add compatible bluetooth
From: Rudi Heitbaum <hidden>
Date: 2023-05-14 07:48:42
Also in:
linux-bluetooth, linux-devicetree, linux-sunxi, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module. Add compatible for RTL8822BS as it uses different firmware. Signed-off-by: Rudi Heitbaum <redacted> --- arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 9a38ff9b3fc7..9460ccbc247d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts@@ -21,7 +21,7 @@ &uart1 { status = "okay"; bluetooth { - compatible = "realtek,rtl8822cs-bt"; + compatible = "realtek,rtl8822bs-bt", "realtek,rtl8822cs-bt"; device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
--
2.25.1