Add s32 mac-address-increment option for Get MAC Address command from
NC-SI.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <redacted>
---
Documentation/devicetree/bindings/net/ftgmac100.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index 29234021f601..7ef5329d888d 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -22,6 +22,10 @@ Optional properties:
- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
rmii (100bT) but kept as a separate property in case NC-SI grows support
for a gigabit link.
+- mac-address-increment: Increment the MAC address taken by GMA command via
+ NC-SI. Specifies a signed number to be added to the host MAC address as
+ obtained by the OEM GMA command. If not specified, 1 is used by default
+ for Broadcom and Intel network cards, 0 otherwise.
- no-hw-checksum: Used to disable HW checksum support. Here for backward
compatibility as the driver now should have correct defaults based on
the SoC.
--
2.40.0