[PATCH net-next v5 3/8] octeon_ep: control mailbox for multiple PFs
From: Veerasenareddy Burru <vburru@marvell.com>
Date: 2023-03-24 17:47:42
Also in:
linux-doc, lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Add control mailbox support for multiple PFs. Update control mbox base address calculation based on PF function link. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <redacted> --- v4 -> v5: * no change v3 -> v4: * resovled review comments https://lore.kernel.org/all/Y+vJkPO1UZPDSFT2@boxer/ (local) - fixed rct violation. v2 -> v3: * no change v1 -> v2: * no change .../ethernet/marvell/octeon_ep/octep_cn9k_pf.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
index adc2279bc66d..e2503c9bc8a1 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c@@ -13,6 +13,9 @@ #include "octep_main.h" #include "octep_regs_cn9k_pf.h" +#define CTRL_MBOX_MAX_PF 128 +#define CTRL_MBOX_SZ ((size_t)(0x400000 / CTRL_MBOX_MAX_PF)) + /* Names of Hardware non-queue generic interrupts */ static char *cn93_non_ioq_msix_names[] = { "epf_ire_rint",
@@ -198,7 +201,9 @@ static void octep_init_config_cn93_pf(struct octep_device *oct) { struct octep_config *conf = oct->conf; struct pci_dev *pdev = oct->pdev; + u8 link = 0; u64 val; + int pos; /* Read ring configuration: * PF ring count, number of VFs and rings per VF supported
@@ -234,7 +239,16 @@ static void octep_init_config_cn93_pf(struct octep_device *oct) conf->msix_cfg.ioq_msix = conf->pf_ring_cfg.active_io_rings; conf->msix_cfg.non_ioq_msix_names = cn93_non_ioq_msix_names; - conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct->mmio[2].hw_addr + (0x400000ull * 7); + pos = pci_find_ext_capability(oct->pdev, PCI_EXT_CAP_ID_SRIOV); + if (pos) { + pci_read_config_byte(oct->pdev, + pos + PCI_SRIOV_FUNC_LINK, + &link); + link = PCI_DEVFN(PCI_SLOT(oct->pdev->devfn), link); + } + conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct->mmio[2].hw_addr + + (0x400000ull * 7) + + (link * CTRL_MBOX_SZ); } /* Setup registers for a hardware Tx Queue */
--
2.36.0