From: Amit Cohen <redacted>
Currently mlxsw_reg_mrsr_pack() always sets 'command=1'. As preparation for
support of new reset flow, pass the command as an argument to the
function and add an enum for this field.
For now, always pass 'command=1' to the pack() function.
Signed-off-by: Amit Cohen <redacted>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
---
drivers/net/ethernet/mellanox/mlxsw/pci.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/reg.h | 14 ++++++++++++--
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index c968309657dd..3c6d5f37c743 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1474,7 +1474,7 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
return err;
}
- mlxsw_reg_mrsr_pack(mrsr_pl);
+ mlxsw_reg_mrsr_pack(mrsr_pl, MLXSW_REG_MRSR_COMMAND_SOFTWARE_RESET);
err = mlxsw_reg_write(mlxsw_pci->core, MLXSW_REG(mrsr), mrsr_pl);
if (err)
return err;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index c4446085ebc5..6bf8e4446e7e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -10070,6 +10070,15 @@ mlxsw_reg_mgir_unpack(char *payload, u32 *hw_rev, char *fw_info_psid,
MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN);
+enum mlxsw_reg_mrsr_command {
+ /* Switch soft reset, does not reset PCI firmware. */
+ MLXSW_REG_MRSR_COMMAND_SOFTWARE_RESET = 1,
+ /* Reset will be done when PCI link will be disabled.
+ * This command will reset PCI firmware also.
+ */
+ MLXSW_REG_MRSR_COMMAND_RESET_AT_PCI_DISABLE = 6,
+};
+
/* reg_mrsr_command
* Reset/shutdown command
* 0 - do nothing@@ -10078,10 +10087,11 @@ MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN);
*/
MLXSW_ITEM32(reg, mrsr, command, 0x00, 0, 4);
-static inline void mlxsw_reg_mrsr_pack(char *payload)
+static inline void mlxsw_reg_mrsr_pack(char *payload,
+ enum mlxsw_reg_mrsr_command command)
{
MLXSW_REG_ZERO(mrsr, payload);
- mlxsw_reg_mrsr_command_set(payload, 1);
+ mlxsw_reg_mrsr_command_set(payload, command);
}
/* MLCR - Management LED Control Register--
2.39.0