Hi Greg,
Thank you for your feedback.
quoted
+
+static int init_baudrate = 115200;
and neither will this, as you need to support multiple devices in the system,
your driver should never be only able to work with one device.
Please make these device-specific things, not the same for the whole driver.
I am using this init_baudrate as a module parameter
static int init_baudrate = 115200;
module_param(init_baudrate, int, 0444);
MODULE_PARM_DESC(init_baudrate, "host baudrate after FW download: default=115200");
We need this parameter configurable since different chip module vendors using the same NXP chipset, configure these chips differently.
For example, module vendor A distributes his modules based on NXP 88w8987 chips with a different configuration compared to module vendor B (based on NXP 88w8987), and the init_baudrate is one of the important distinctions between them.
If we are able to keep this init_baudrate configurable, while compiling btnxpuart.ko as module, we will be able to support such baudrate variations.
Please let me know your thoughts on this.
Thanks,
Neeraj