[PATCH v8 13/13] dt-bindings: net: dsa: qca8k: add LEDs definition example
From: Christian Marangi <ansuelsmth@gmail.com>
Date: 2023-02-16 01:38:05
Also in:
linux-devicetree, linux-doc, linux-leds, lkml
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add LEDs definition example for qca8k using the offload trigger as the default trigger and add all the supported offload triggers by the switch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- .../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 389892592aac..ba3821364039 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml@@ -18,6 +18,8 @@ description: PHY it is connected to. In this config, an internal mdio-bus is registered and the MDIO master is used for communication. Mixed external and internal mdio-bus configurations are not supported by the hardware. + Each phy have at least 3 LEDs connected and can be declared + using the standard LEDs structure. properties: compatible:
@@ -117,6 +119,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>;
@@ -276,6 +279,27 @@ examples: internal_phy_port1: ethernet-phy@0 { reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "netdev"; + }; + }; }; internal_phy_port2: ethernet-phy@1 {
--
2.38.1