[PATCH net-next v6 1/9] net: dsa: microchip: enable EEE support
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2023-02-08 10:32:44
Also in:
lkml
Subsystem:
microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Some of KSZ9477 family switches provides EEE support. To enable it, we just need to register set_mac_eee/set_mac_eee handlers and validate supported chip version and port. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/dsa/microchip/ksz_common.c | 65 ++++++++++++++++++++++++++ 1 file changed, 65 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 46becc0382d6..0a2d78253d17 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c@@ -2673,6 +2673,69 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) return -EOPNOTSUPP; } +static int ksz_validate_eee(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->info->internal_phy[port]) + return -EOPNOTSUPP; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + return 0; + } + + return -EOPNOTSUPP; +} + +static int ksz_get_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + int ret; + + ret = ksz_validate_eee(ds, port); + if (ret) + return ret; + + /* There is no documented control of Tx LPI configuration. */ + e->tx_lpi_enabled = true; + /* There is no documented control of Tx LPI timer. According to tests + * Tx LPI timer seems to be set by default to minimal value. + */ + e->tx_lpi_timer = 0; + + return 0; +} + +static int ksz_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct ksz_device *dev = ds->priv; + int ret; + + ret = ksz_validate_eee(ds, port); + if (ret) + return ret; + + if (!e->tx_lpi_enabled) { + dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); + return -EINVAL; + } + + if (e->tx_lpi_timer) { + dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + return 0; +} + static void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface) {
@@ -3130,6 +3193,8 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_txtstamp = ksz_port_txtstamp, .port_rxtstamp = ksz_port_rxtstamp, .port_setup_tc = ksz_setup_tc, + .get_mac_eee = ksz_get_mac_eee, + .set_mac_eee = ksz_set_mac_eee, }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
--
2.30.2