[PATCH v3 1/2] dt: bindings: net: ath11k: add dt entry for XO calibration support
From: Youghandhar Chintala <hidden>
Date: 2023-02-07 10:37:58
Also in:
ath11k, linux-devicetree, linux-wireless, lkml
Subsystem:
arm/qualcomm mailing list, networking drivers (wireless), open firmware and flattened device tree bindings, the rest · Maintainers:
Johannes Berg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add dt binding to get XO calibration data support for Wi-Fi RF clock. Retrieve the XO trim offset via system firmware (e.g., device tree), especially in the case where the device doesn't have a useful EEPROM on which to store the calibrated XO offset. Calibrated XO offset is sent to firmware, which compensate the RF clock drift by programing the XO trim register. Signed-off-by: Youghandhar Chintala <redacted> --- .../devicetree/bindings/net/wireless/qcom,ath11k.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index f7cf135aa37f..4745251e70d4 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml@@ -41,6 +41,10 @@ properties: * reg * reg-names + xo-cal-data: + description: + XO frequency offset to program the XO trim register + qcom,ath11k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string description:
--
2.38.0