Re: [PATCH RFC 0/3] dt-bindings: net: Add network-class.yaml schema

From
Janne Grunau <j@jannau.net>
Date
2023-02-06 16:32:02
Also in
linux-devicetree, linux-wireless, lkml
Reply to
Rob Herring, 2023-02-03
On 2023-02-03 08:41:28 -0600, Rob Herring wrote:
On Fri, Feb 3, 2023 at 7:56 AM Janne Grunau [off-list ref] wrote:
quoted
The Devicetree Specification, Release v0.3 specifies in section 4.3.1
a "Network Class Binding". This covers MAC address and maximal frame
size properties. "local-mac-address" and "mac-address" with a fixed
address-size of 48 bits is already in the ethernet-controller.yaml
schema so move those over.
I think the only commonly used values for address-size are 48 and 64
bits (EUI-48 and EUI-64). Unfortunately I was not able to restrict the
mac-address size based on the address-size. This seems to be an side
effect of the array definition and I was not able to restrict "minItems"
or "maxItems" based on the address-size value in an "if"-"then"-"else"
block.
An easy way out would be to restrict address-size to 48-bits for now.
I've never seen 64-bits used...
ZigBee and 6LoWPAN use 64-bits for example. Let's hardcode 48 bits for 
now as that's what all in-tree devicetrees implicitly use. If needed it 
can be changed later.
quoted
I've ignored "max-frame-size" since the description in
ethernet-controller.yaml claims there is a contradiction in the
Devicetree specification. I suppose it is describing the property
"max-frame-size" with "Specifies maximum packet length ...".
Please include it and we'll fix the spec. It is clearly wrong. 2 nios
boards use 1518 and the consumer for them says it is MTU. Everything
else clearly uses mtu with 1500 or 9000.
Ok, the example in the pdf is 'max-frame-size = <1518>;'. I'll include 
it with the description of ethernet-controller.yaml which specifies it 
as MTU.

Janne
Thread (10 messages) 10 messages, 4 authors, last reply 2023-02-07
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help