On Mon, Dec 26, 2022 at 03:47:49PM -0800, Matthew Garrett wrote:
The Orbic Speed RC400L presents as a generic MDM9207 device that supports
multiple configurations. Add support for the two that expose a set of serial
ports.
Would you mind including the output of usb-devices for this device here
for completeness?
quoted hunk ↗ jump to hunk
Signed-off-by: Matthew Garrett <redacted>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index dee79c7d82d5..5025810db8c9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1119,6 +1119,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
.driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
+ /* Qualcomm MDM9207 - 0: DIAG, 1: modem, 2: AT, 3: NMEA, 4: adb, 5: QMI */
We typically just include the port layout in the commit message (along
with usb-devices output). Then you can move the device comment to the
end of the USB_DEVICE() line (cf. ONYX 3G device above).
quoted hunk ↗ jump to hunk
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf601),
+ .driver_info = RSVD(4) | RSVD(5) },
+ /* Qualcomm MDM9207 - 0,1: RNDIS, 2: DIAG, 3: modem, 4: AT, 5: NMEA, 6: adb */
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf622),
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
/* Quectel products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
Johan