On 23-01-30 13:15:30, Oleksij Rempel wrote:

On Sun, Jan 29, 2023 at 07:32:31PM +0200, Abel Vesa wrote:

quoted

On 23-01-17 07:14:49, Oleksij Rempel wrote:

quoted

According to the "i.MX 6UltraLite Applications Processor Reference Manual,
Rev. 2, 03/2017", BIT(13) is ENET1_125M_EN which is not controlling root
of PLL6. It is controlling ENET1 separately.

So, instead of this picture (implementation before this patch):
fec1 <- enet_ref (divider) <---------------------------,
                                                       |- pll6_enet (gate)
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

we should have this one (after this patch):
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
                                                       |- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

With this fix, the RMII reference clock will be turned off, after
setting network interface down on each separate interface
(ip l s dev eth0 down). Which was not working before, on system with both
FECs enabled.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

I'm OK with this. Maybe a fixes tag ?

Hm. Initial commit was:
Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support")
but this patch will not apply on top of it.
Next possible commit would be:
Fixes: 1487b60dc2d2 ("clk: imx6ul: Switch to clk_hw based API")
But this patch didn't introduce this issue, it was just refactoring.

Hm, in that case I don't think is qoing to be backported ever.

What do you prefer?

I'll apply it as it is.

Thanks.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |