Thread (34 messages) 34 messages, 7 authors, 2023-02-01

[PATCH v5 net-next 08/13] net: dsa: felix: add functionality when not all ports are supported

flat view
STALE1358d

From: Colin Foster <colin.foster@in-advantage.com>
Date: 2023-01-27 19:37:44
Also in: linux-devicetree, lkml
Subsystem: networking drivers, networking [dsa], ocelot ethernet switch driver, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Vladimir Oltean, Linus Torvalds

Revision v5 of 5 in this series.

Revisions (5)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 current
When the Felix driver would probe the ports and verify functionality, it
would fail if it hit single port mode that wasn't supported by the driver.

The initial case for the VSC7512 driver will have physical ports that
exist, but aren't supported by the driver implementation. Add the
OCELOT_PORT_MODE_NONE macro to handle this scenario, and allow the Felix
driver to continue with all the ports that are currently functional.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---

v5
    * No changes

v4
    * New patch

---
 drivers/net/dsa/ocelot/felix.c | 11 ++++++++---
 drivers/net/dsa/ocelot/felix.h |  1 +
 2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index d3ff6e8a82e9..d4cc9e60f369 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1273,10 +1273,15 @@ static int felix_parse_ports_node(struct felix *felix,
 
 		err = felix_validate_phy_mode(felix, port, phy_mode);
 		if (err < 0) {
-			dev_err(dev, "Unsupported PHY mode %s on port %d\n",
-				phy_modes(phy_mode), port);
+			dev_info(dev, "Unsupported PHY mode %s on port %d\n",
+				 phy_modes(phy_mode), port);
 			of_node_put(child);
-			return err;
+
+			/* Leave port_phy_modes[port] = 0, which is also
+			 * PHY_INTERFACE_MODE_NA. This will perform a
+			 * best-effort to bring up as many ports as possible.
+			 */
+			continue;
 		}
 
 		port_phy_modes[port] = phy_mode;
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 9e1ae1dde0d9..d5d0b30c0b75 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -7,6 +7,7 @@
 #define ocelot_to_felix(o)		container_of((o), struct felix, ocelot)
 #define FELIX_MAC_QUIRKS		OCELOT_QUIRK_PCS_PERFORMS_RATE_ADAPTATION
 
+#define OCELOT_PORT_MODE_NONE		0
 #define OCELOT_PORT_MODE_INTERNAL	BIT(0)
 #define OCELOT_PORT_MODE_SGMII		BIT(1)
 #define OCELOT_PORT_MODE_QSGMII		BIT(2)
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help